Description This article describes techniques on how to identify, debug, and troubleshoot issues...
FortiAP
Created on
Edited on
DescriptionThis article describes the steps to diagnose and debug the FortiAP AP-leave/join behavior on the FortiGate.ScopeFortiGate v7.4 and FortiAP v7.4.Solution
FortiAP AP-leave/join behavior implies the CAPWAP connec...
Created on
Description
This article describes how to view broadcast and multicast traffic hitting the FortiAP.
ScopeAll FortiAP.Solution
In certain cases, the FortiAP's CPU utilization is higher than normal, which results in delay ...
Created on
Description
This article describes how to troubleshoot the issue when FortiAP has a 'Run' state with primary FortiGate but with secondary FortiGate, the state is 'image' state or 'dtls_setup.
Login to the FortiAP CLI :...
Created on
Description
This article describes the scenario where FortiAP is managed by two FortiGate of different models operating independently.
This lets FortiAP failover to another FortiGate in a situation where the existing For...
Created on
Edited on
Description
This article describes the issue where FortiAP does not auto-adjust the Tx power and always operates on the Maxmium power set in the range. Consider the below screenshot to understand the problem :
Here ...
Created on
Description
This article describes how to resolve an issue where cw_acd, a process which handles the wireless daemon for FortiAP, gets overloaded and shows heavy CPU spikes in a large scale FortiAP-FortiGate Controller e...
Can't find what you are looking for?
Suggest New Article