Fortinet Community

FortiKoala · 10-14-2022

Description This article describes how to reset the local certificate if it has expired and preventing playbooks from running e.g. Alerts -> Execute -> [PLAYBOOK]. Scope FortiSOAR 6.2 Playbooks. Solution In the FortiSOAR command line, run the followi...

FortiKoala · 10-28-2020

DescriptionUpon upgrading to FortiOS 6.4.3, configurations with a FortiAP managed through a VLAN interface may have issues with passing CAPWAP traffic from the FortiGate to the FortiAP. CAPWAP traffic that is offloaded to the NP6 and NP6XLite ASICs w...

FortiKoala · 09-30-2020

Description This article has been raised due to the highlighted problem and complexity of managing SSL certificates referenced in these articles:Fortinet VPN with Default Settings Leave 200,000 Businesses Open to Hackers.https://thehackernews.com/202...

FortiKoala · 03-04-2020

DescriptionIf error occurs when connection progress is at 98%, a popup window will show the status code of the tunnel thread (T), monitor thread (M) and RAS thread (R). The status code could either indicate the stage the thread is currently at, or an...

FortiKoala · 07-17-2019

DescriptionThis document describes how to upgrade FortiSwitch firmware. ScopeFortiSwitch SolutionUpdating standalone FortiSwitch firmware from GUI.Upgrade the firmware from the dashboard or from the system configuration page.To upgrade the firmware f...

FortiKoala · 02-01-2018

It looks like you need to create an intervdom link from 3rd party to wan1 root port http://kb.fortinet.com/kb/viewAttachment.do?attachID=inter_vdom_new.pdf&documentID=FD36065

FortiKoala · 02-01-2018

The answer lies in the first part of the authentication process. The Fortigate is not providing authentication, rather it is simply using the Database provided by your domain controller. That means in order to access your internal network a client mu...

FortiKoala · 02-01-2018

From the release notes it looks like the The 100C and 110C can't go beyond 5.2.x.

FortiKoala · 02-01-2018

The 4.0 release notes state its supported: "FortiAuthenticatorTM 4.0 extends the local user self-service password reset capability to support Active Directory user password management." Maybe they can use the FSSO self service portal http://cookbook....

FortiKoala · 02-01-2018

FortiCloud reports should resolve IPs to host names for websites (external) by default. But local IPs will not be resolved to computer names though. There is no option on FortiCloud to view the PC/Server/Device name.This is by design. In the default ...

Fortinet Community

User Statistics

User Activity

Technical Tip: FortiSOAR 6.2 Playbook not executing for alerts (reset certificates)

Technical Tip: CAPWAP traffic dropped for WiFi tunneled SSIDs after upgrading to FortiOS 6.4.3

Technical Tip: SSL VPN Certificate Man in the Middle (MitM) attack mitigation for SMEs

Technical Tip: Unable to establish the VPN connection. The VPN server may be unreachable (-30)

Technical Note: Upgrading FortiSwitch Firmware

Re: Help with getting VDOM-NAT and VDOM-Transparent to share same WAN port?

Re: Doubt about FSSO timers

Re: FortiOS - FortiAP - Version query

Re: FortiAuthenticator User[USERNAME] is a remote user. Password reset is not supported.

Re: Workstation Hostnames in Logs

Technical Note: Host connection not detected on se...

Technical Tip: How to avoid certificate error mess...

Technical Note: Upgrading FortiAP Firmware

Technical Note: Guest users have access to interna...

Technical Note: Modify aging of hosts and users

Re: Doubt about FSSO timers

KCS

Fortinet Training Institute