About nmichael

nmichael · 09-11-2017

DescriptionWhen a user connects to a wireless network with internal captive portal authentication, the device is redirected to url: https://x.x.x.x:1003. Since FortiGate is installed with standard certificate, the user is presented with an SSL warnin...

nmichael · 07-18-2017

DescriptionThis article explains which EAP type should be enabled on the RADIUS server when tunnel termination is enabled on the FortiGate for PEAP-MSCHAPV2 authentication.SolutionThe purpose of enabling tunnel termination for wpa2-enterprise profile...

nmichael · 07-18-2017

Description This article explains why the display indicating the maximum managed FortiAPs in Managed FortiAP page of the FortiGate may show an incorrect or lesser value than the value specified in datasheet. Solution The display on the Managed FortiA...

nmichael · 04-21-2017

DescriptionThis article addresses Windows clients failing RADIUS authentication with FortiConnect with the error: mschap2 response is not correct.ScopeFortiConnect v16.7SolutionThis may occur because the Active Directory used on FortiConnect uses NTL...

nmichael · 04-21-2017

Description Restricting WiFi access based on the DHCP fingerprint of a specific device is not currently supported. Scope All models of FortiWLC, v8.2

User Statistics

User Activity

Technical Note: SSL warning with invalid CN error for internal CP authentication on FortiGate

Technical Note: EAP type to enable on RADIUS server when tunnel termination is enabled on FortiGate for PEAP-MSCHAPV2 authentication

Technical Tip: Maximum managed FortiAPs in FortiGate managed FortiAP page shows lesser value than data sheet

Technical Note: Radius authentication with FortiConnect fails with error: mschap2 response is incorrect

Technical Tip: Restriction of WLAN access based on device class

KCS