Fortinet Community

cvincent_FTNT · 06-15-2016

DescriptionThe purpose of this KB article is to demonstrate the results of upgrading from 5.4.0 to 5.4.1. It is essential to upgrade to 5.4.0 prior to upgrading to 5.4.1; no other upgrade path is supported.ScopeAll FortiGates currently managing a For...

cvincent_FTNT · 05-19-2016

DescriptionIt is often required that a protected resource can be accessible from the internet by a specific IP but also, it may need to initiate sessions and be NATted to the same public IP that clients use to access it.ScopeThe FortiGate has a publi...

cvincent_FTNT · 05-20-2015

DescriptionThis document is intended to provide the appropriate steps required to configure the modem, in your 60D 3G/4G VZW FortiGate with a static IP address from Verizon. There are fees associated with the static IP. Contact a Verizon account repr...

cvincent_FTNT · 04-06-2015

DescriptionYou can create a point-to-point bridge to connect two wired network segments using a WiFi link. The effect is the same as connecting the two network segments to the same wired switch. Both wired and WiFi users on the leaf AP side are conne...

cvincent_FTNT · 02-13-2015

Description This article describes that after renewing a contract license or rebooting the FortiGate, the License information widget indicates that all or some of the services are not available.Scope Add additional commands and information to some of...

cvincent_FTNT · 03-19-2022

You may be misunderstanding DDNSCheckout this Fortinet KB.https://community.fortinet.com/t5/FortiGate/Technical-Tip-DDNS-update-with-public-IP-on-internal-firewalls/ta-p/195734?externalID=FD38082.You don't need your own domain. You can create a uniqu...

Fortinet Community

User Statistics

User Activity

Technical Note: Upgrading the FortiGate from 5.4.0 to 5.4.1 when managing a FortiSwitch

Technical Note: NATting a specific internal source to specific external IP with a VIP

Configuring the modem, in a 60D 3G/4G VZW FortiGate with a static IP address

Bridging wired networks using a point to point WiFi link

Technical Tip: License information widget shows services as unavailable

Re: Wanted to use iperf test for 2 public IP addresses.

Fortinet Training Institute