Hi everyone I want to know whether a host-based micro-segmentation
approach can restrict the communication channel between hosts residing
on the same network. Without any additional infrastructure like
FortiSwitch and FortiAP. "Micro-segmentation App...
Dear all, Would you please explain to me the below commands? What it
does and when it will be used. I know it's an antivirus scan unit but
what does it really do when enabled? Current Firmware v7.2.2* # diagnose
sys scanunit stat # diagnose sys scanu...
Dear All, I have done HA (Same Firmware - v7.2.2 and Operation Mode -
NAT) between 60E and 60F. They have different hardware capacities,
licenses, and interfaces (60F - a, b and 60E - internal 6, internal 7).
Configuration between them is synchronize...
Hi Indeed, as everyone said, you must maintain the default route for
both links in the routing table for the traffic to reach the Virtual
Server. You can refer to this article for a clear
picture.https://community.fortinet.com/t5/FortiGate/Troublesho...
Indeed, I tested it in my lab, and it appears that the method I
mentioned earlier does not function as anticipated. As we discussed
previously, FortiGate wasn't aware of the L2 network.With those
mentioned methods, micro-segmentation could not be ach...
Thank you. This one (Cisco ISE) is a new thing for me. I will research
them later. I appreciate your response. You must be taking about this.
SGTs - a part of Cisco's identity-based networking and access
control solutions, often associated with Cisco...
Certainly! FortiAP and FortiSwitch are equipped to implement L2
micro-segmentation However, I'd like to understand if this same
capability can be achieved through FortiClient EMS. Specifically, with
the host-based micro-segmentation approach While I'...
Hi dclabs, In order for a deep inspection to work, you need at least one
security profile configured to the policy. Make sure, you have a
security profile attached to the policy that the traffic traverses. Hope
that helps, Kind Regards, Bijay Prakash...
