Fortinet Community

vinodhk · 08-30-2023

Description This article describes what needs to be verified from the FortiConnect side when FortiConnect side logs show that Authentication succeeded but the authorization policy has denied access. Scope FortiConnect. Solution Wireless clients conne...

vinodhk · 04-02-2023

Description This article describes what is the max no of MAC addresses can be added to the Mac filtering access list on the FortiWLC. Scope FortiWLC, WLC GUI config, WLC CLI config, MAC filtering. Solution Max of 3000 MAC address entries can be added...

vinodhk · 09-20-2022

Description This article describes how to configure the FAPU321 & AP822 with the same BSSID for the SSID mapped to it. Scope FortiWLC, Forti AP (AP8xx , FAPU), All firmware Solution In some cases, multiple AP models in the environment can be seen, an...

vinodhk · 09-18-2022

Description This article describes the CONNMGR error log on the Forti Extender and LTE is not working Scope FortiExtender 7.0.3, 7.2.1. Solution - CONNMGR logs on the FortiExtender shows as follows. .[516 ]CONNMGR :modem :agent_need_activate_sim:542 ...

vinodhk · 09-18-2022

Description This Article describes the command on the FortiAP CLI to repeat a set of commands for specific number of times continuously. Scope FortiAP. Solution - Login to the FortiAP CLI using SSH directly or from the FortiGate CLI. - Execute the be...

vinodhk · 10-24-2022

Hi, -- Please make sure that the AP is able to ping the Fortigate Ip address and vice versa. this is to confirm the communication is working between the 2 x devices. -- If the AP and Fortigate are in different subnet then UDP ports 5246 & 5247 has to...

Fortinet Community

User Statistics

User Activity

Troubleshooting Tip: FortiConnect side logs shows as Authentication succeeded but authorization policy has denied access

Tehnical Tip : What is the max no of mac addresses can be added for the Mac filtering access list on the FortiWLC

Technical Tip: How to configure the FAPU321 & AP822 with the same BSSID for the SSID mapped to it

Technical Tip: FortiExtender LTE connectivity is down and CONNMGR logs shows as 'CONNMGR :modem :agent_need_activate_sim:542 : | agent 0, agent_modem->pause_state_machine=110'

Technical Tip: How to repeat a set of commands for specific number of times continuously

Re: Problem linking FortiAP with Fortigate VM as controller

Troubleshooting Tip: Logs required for random Fort...

KCS

Fortinet Training Institute