Description This article describes how to get notifications when
Fortiguard web filter is unreachable. Scope FortiGate Solution Enabling
UTM in the IPv4/firewall policy is the best practice.However, due to
multiple reasons, the FortiGuard web filter ...
Description This article describes how to troubleshoot the LDAP issue
for SSL-VPN. Scope FortiGate Solution SSL-VPN tunnel mode is enabled in
the firewall and the Ldap users are imported to the FortiGate.So it is
necessary to make sure the actual LDA...
Description This article describes the method to block all the web sites
while allowing one website/URL. Scope Solution Go to Policy and objects
-> IPv4/firewall policy. Create a LAN to WAN policy. Create a web filter
profile and block all the FortiG...
Description This article describes how to get an email alert if someone
declines the Login Disclaimer. Scope Solution It is recommended to keep
a post or pre-login banner so that the users who try to log in will be
prompted with the disclaimer.To ena...
Description This article describes how to troubleshoot the RADIUS issue
for SSL VPN. Scope FortiGate Solution SSL VPN tunnel mode is enabled in
the firewall and the radius users are imported to the FortiGate.It is
necessary to make sure the actual RA...
Dear vveckaln,May I know whether the issue is happening only for one
user or for all ?Could you also confirm if split tunnel is enabled or
disabled on Fortigate?
Dear Customer.From the output, I could see that "No matching IPsec
selector, drop.This means the Local/Remote subnet is not matching under
Phase2 selectors.Navigate to IPsec tunnels, edit the tunnels, and under
Phase 2 selectors please verify if the ...
Dear RenatoMMay I know whether the issue is happening for a specific
Forticlient version?Could you please remove the complete Forticlient
using this
tool?https://kb.fortinet.com/kb/documentLink.do?externalID=FD40369And
then try using a different fort...