Description This article describes techniques on how to identify, debug, and troubleshoot issues...
FortiAP
WD40
New Contributor
Created on
Hi,In my FortiGate firewall GUI (they are all running version 6.x), each policy rule has an ID field. But in some screenshots (mostly of firewalls running older software versions) I have seen the possibility to display a...
aspnovac
New Contributor
Created on
Hi,We bought an Microsoft Surface Pro 9 which has an ARM processer.The point of buying this was to hook it up with the Fortinet VPN, so we could go anywhere and still be connected.Problem is i can't install it on the Sur...
acorniola
New Contributor
Created on
Hello everyone,  have a FortiGate 91G managing a FortiSwitch via FortiLink over IPSec. While the FortiLink connection is successfully established, when I configure the DHCP relay on the VLANs, client devices are not rec...
fionaC
New Contributor II
Created on
Does anyone know how to disable ICMP timestamp replies from FortiAPs? My FortiAPs are connected to my LAN, and I have Fortiswitches. Polices do not seem to work - my guess is because the traffic is being routed by the sw...
milosh
New Contributor
Created on
Dear all,I created a script that first needs to delete table of reserved addressed for DHCP server before it starts creating new entries.However, purge command requires confirmation from the user and this is something th...
tolgainci
New Contributor
Created on
Hello, We are based in Turkey, and a user in Kazakistan is unable to connect to VPN. Other users in Turkey and other countries such as Thailand are able to connect with the same username and password. The exact error we ...
Maerre
Contributor
Created on
Edited on
Hi,We are migrating from AnyConnect to FortiClient and encountering many problems. Currently, a RADIUS server (NPS) is being used, which passes Cisco RADIUS attributes such as IP address, subnet mask, and a dynamic ACL (...
Tauri
Visitor
Created on
Hi!I'm struggling with CLI template in FortiManager right now. I must delete all dhcp servers and I made script where I use purge command, but the problem is, it gets stuck there. There is prompt where user must press y...
Can't find what you are looking for?
Suggest New Article