Solved

Hi, I would like to know the best way for exporting the whole fortimanager configuration, and the import it from a new unit. I have some ADOMs and I would like to migrate the whole configuration easily if possible. I suppose that creating a new BackUp and importing it in the new FortiManager unit is enough for exporting/importing all the ADOMs, right? Thanks.

Hi I have established a vpn ipsec tunnel between fortigate and a third party's cisco ftd (phase2 remote address 192.168.10.1/32), worked as expected.This week I tried to add a new remote address to the vpn 192.168.10.15/32 so I changed the remote address in phase1 to point to a group of address (192.168.10.1/32 & 192.168.10.15/32), also added that group to static route and fw rules instead of the old address (192.168.10.1/32). The problem is only one of these ip address is reachable at a time, I can ping 192.168.10.1 but I can't ping the other 192.168.10.15, but if a the remote 192.168.10.15 ping me it becomes reachable from my side for some time. How can I have this 2 ip reachable at the same time through vpn ? vpn tunnel config config vpn ipsec phase1-interface edit "MY_VPN" set type static set interface "port1" set ip-version 4 set ike-version 1 set local-gw <...> set keylife 28800 set authmethod psk set mode main set peertype any set ne

We have a fortigate 100D (5.2 firmware) Is it possible to customize the SSL VPN portal in any way?Suppose we want to place a note or message on the customers personal SSL VPN portal. How can that be achieved? 

Hi, guys, can you help me? I am having troubles with connecting to a remote vpn via IPsec. They are using public IP addresses for their terminals. (See image attached). I am done with static routes, ipv4 policies, ipsec tunnels. I've done it a couple of times but this is the first time that I am connecting our local PRIVATE IP ADDRESSES (10.10.0.0 and 10.10.70.0) to remote Public ip addresses (216.242.170.0/26) Do I need to do something? Our phase 1 and phase 2 are the same even our preshared keys These IPs are just examples.

Hello All, I have Fortigate 1100 series firewall in my organisation whose inspection mode is flow base and I want to change to proxy mode. Need to know what are the precaution need to take before proceeding so that there will be minimal disruption in my network

Can anybody explain what this ' iprope' means? ' iprope_in_check() check failed, drop' ' get firewall iprope list'

Hello, Being a network-admin-by-accident I'm facing the following issue: I have to establish a VPN connection to a Bank. On their end they have a Checkpoint, me I'm enjoying the cosy world of Fortigate. They provided me with an encryption domain, which is not part of my local network. From what I understood with Checkpoint the encryption domain would be the remote network (from Checkpoint point of view). I'll try to describe what the setup looks like: 192.168.1.1/24 (local network) -> 10.11.12.13/32 (encryption domain) -> 172.16.17.0/24 (remote network) I successfully established the tunnel: diagnose vpn tunnel list name VPN_CHECKPOINTlist ipsec tunnel by names in vd 0------------------------------------------------------name=VPN_CHECKPOINT ver=2 serial=9 1.2.3.4:0->4.3.2.1:0 dst_mtu=1500bound_if=22 lgwy=static/1 tun=intf/0 mode=auto/1 encap=none/520 options[0208]=npu frag-rfc run_state=0 accept_traffic=1 overlay_id=0proxyid_num=1 child_num=0 refc

Hello,I have a FAZ-VM running on 5.2.7. I have a problem with the different output when I test the dataset and when I generate the report. I issued the following commands but the results are the same: # diagnose sql remove hcache All hcache tables will be erased! Do you want to continue? (y/n)y Done.# diagnose sql remove query-cache Done.# diagnose sql remove tmp-table Done. What I get is attached.Is it a bug or I missed something?

Hello everyone !I would like to inquire about the FORTIAP-320B model.  This model is only connected with the computer and I don't use any internet connection  and I'm only looking to have access to the medel. After configuring my IP address, enable HTTP, and configure my password, I have access to the login page, after seeing my name and password I have directly the result that there while one second  in I go directly to the login page. I send you the photos step by step.  I configure this terminal from the KiTTY software, with a type of serial connection whose commands are on this link : https://docs.fortinet.com/document/fortiap/6.2.0/fortiwifi-and-fortiap-configuration-guide/65088/fortiap-cli-configuration-and-diagnostics-commands  would anyone have a solution and answer this problem? thank you all in advance ! 

Hi, After upgrading from 6.0.4 to 6.2 I have problems with WAN connectivity falling out. I'm getting this message in de Fortios GUI: Conserve mode activated due to high memory usage I have tried to downgrade to 6.0.4 but can't with the error message that it failed beacause it cannot download the file from fortiguard. Help.

Hello all,i would like to enable SSL Deepinspection from WAN to internal/DMZ. Called "Protecting SSL Server". Here is the Link to the Docs: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/055107/protecting-an-ssl-serverI understand what i have to do. I have to import all servers real certificates with the private keys. I have done this successfully with an purchased from Digicert. This works perfectly for one of my DMZ Servers.But what about Let's Encrypt? I would have to change the certificate every 3 months. This means that the certificates of all servers are automatically renewed. Then I have to export them from there and import them into Fortigate. Is there no better way? Or am I understanding this wrong? FortiOS7.0 Very ThanksIPRanger

Hello all,  i'am searching for an alternate vpn/ipsec client for Android that has als an encryption higher the AES128/SHA1. There are many on the market, can you recommend one that works well with IPSEC?I already had the native Android client running a few weeks ago. I can't tell you the level of encryption, you can't set anything on the client. I had only been able to get L2TP to work. Unfortunately, surfing via the VPN was not possible via the Fortigate when the VPN was active. Unfortunately, the support team did not find a solution either. Can anyone recommend a client for me? If possible OpenSource. Very Thanks and Best RegardsFireon

Hello Community, on our FortiGate 200E (v6.4.5 build1828) are "Device Inventory" is not available.  On Dashboard is "Device Inventory" available. What's going on? Thanks!  

Hello, We have two sites with one AD Domain Controller on each side. The two sites are connected to each other with a VPN connection. Everything works fine, but I would like to set the other site's DC in our FortiGate FG-60F (FortiOS 7.0) firewall as a secondary (safety) authentication option.The problem is that the firewall can not access the other site's AD-DC, because it uses its outside IP address as source address which is not part of the IPSec settings. I checked the communication in CLI using the 'diagnose sniffer packets any' command.I would like to make SNAT to change the source address to the firewall's inside IP address.As I saw its solution would be the usage of the IP Pools. I have created an IP Pool with FortiGate's inside IP address and I used this pool in a firewall policy. The main settings of the policy:Incoming Interface: Internet (wan1)Outgoing Interface: OtherSiteVPNSource: Fortigate's outside IP addressDestination: Other site's AD-DCNAT: onIP Pool Config

Hello, i try to ping between 2 ipsec tunnel IPs, but it does not work.I have a FGT 101-E with these config:config system interfaceedit "VPN_W" set vdom "root" set ip 10.102.0.6 255.255.255.255 set allowaccess ping set type tunnel set remote-ip 10.102.0.5 255.255.255.255 set snmp-index 42 set interface "wan2" next end and a FGT 60-D with these config:config system interfaceedit "VPN_N" set vdom "root" set ip 10.102.0.5 255.255.255.255 set allowaccess ping https http set type tunnel set remote-ip 10.102.0.6 255.255.255.255 set alias "VPN-Verbindung zur N" set snmp-index 15 set interface "wan1" next end If i try to execute ping 10.102.0.6 an FGT 60-D or execute ping 10.102.0.5 on FGT 101-E, it does not work.Am i correct in the assumption, that i do not need any policy, because ping is enabled at the interface? Thanks Markus

Dear Fortinet Team, We had problem that our Routing didn't work (Please see attachment). When we tried to disable 0.0.0.0/0 then enable specified static routing, the packet didnt pass to network. The routing that we made same like Monitor --> Routing monitor. Any advice for us? Thank you.

Hi,I'd like to forward whole NTP traffic to my NTP server.I'd like to use VIP where source IP is in range from 0.0.0.0-239.255.255.255 and do portmapping 123-123 (use service NTP).        set type load-balance         set service "NTP"         set extip 0.0.0.0-239.255.255.255         set mappedip "10.20.68.192-20.121.12.194"         set arp-reply disable         set portforward enable         set mappedport 123And the problem is if any other VIP exists. For example:        set extip 10.100.200.3         set mappedip "10.20.3.35"         set extintf "any"I receive information that NTP is overlapping another VIP but if i use extip from 0.0.0.0

Hello all, Many years ago, someone set my company up on a local 132.147.xxx.xxx subnet that is currently configured in our FortiGate (running 6.2). I would like to gradually migrate us off of this. My question has to do with the best path to do it. We currently have FortiSwitches that are in standalone mode. With a LAN interface built for this current addressing scheme. I would like to move us to a new addressing scheme with a 10.16.xxx.xxx VLAN for data and a 10.17.xxx.xxx for Voice as we would like to eventually add VOIP. Would it be best for me to build this through FortiLink? I have two switches that are not currently being used, that I could start this on. Also, how would I build a path between the old network (132.147) and the new network (10.16) so that I could gradually migrate devices over to the new network, could I just do a policy for both directions? Thanks in advance.

We have +700 Firewalls Fortigate managed with the Fortimanager and the FWs are configured with DNS and now we want to change the DNS IP adress in all the FWs Hwo to change the configuration of the DNS in devices (Firewalls) from the fortimanager?

Hi All, We want to configure SNMP monitoring using PRTG trial version for short time later planning to go with Licensed PRTG. As I am new to this monitoring Application and SNMP in the FortiGate I have below concern 1) Can we enable the SNMP on LAN port at Production time?2) Will FortiGate Support Trial version of PRTG?Kindly suggest on this. Soon I need to enable monitoring our WAN links.  Thank you,Regards,Srini

Hi,After upgrade Fortigate 100E to new firmware v7.0.0-build0066 all 221E APs have Offline status and do not registering. They get the address via dhcp and ssh is work. After downgrade firmware to v6-build1803 its works correctly.  There is no word in the compatibility documentation about version 7. Do I understand correctly that they are incompatible? https://docs.fortinet.com...trix/209640/fortiap-w2

Greetings, I'm attempting to get OSPF working between my 100F and Edgerouter Infinity, I'm brand new to fortinet so I'm guessing its something very silly that I'm over looking, but my google-fo appears to be failing me.  The problem boils down to the Fortinet side is not getting the routes from the edgerouter# get router info ospf routeOSPF process 0:Codes: C - connected, D - Discard, O - OSPF, IA - OSPF inter area       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2       E1 - OSPF external type 1, E2 - OSPF external type 2C 172.16.1.0/24 [1] is directly connected, TransitLink, Area 0.0.0.0So I'm never seeing area 1 on the fortinet side, but both routers are Full adjacent neighbors  get router info ospf neighborOSPF process 0, VRF 0:Neighbor ID Pri State Dead Time Address Interface0.0.0.1 1 Full/Backup 00:00:32 172.16.1.2 TransitLink # run show ip ospf neighbor Total number of full ne

My situation is this: I have 3 different ISPs: VIVO, TIM, and NET here in Brazil (1 Static IP and 2 Dynamic). I need to do 3 things:   1) Connect my 3 ISPs on one device.   2) I need to use only one public IP to connect to the internet. Every single workstation needs to connect through this IP as if there is only one ISP connected.   3) If the main link goes down, another link could assume its place but the same old public IP still must be used.  Is there a way to do that? Any appliance, proxy, or DDNS?  Thanks in advance.    

On this page: https://docs.fortinet.com/document/fortigate/6.2.0/best-practices/262994/performing-a-configuration-backupit says to backup from GUI, Go to Dashboard > On the System Information widget, select Backup next to System Configuration.But my System widget doesn't have such options, see attached. 

Hey everyone!We are trying to limit distributed BGP routes to neighbors using "set match-interface" for the source of the route. The issue we are having is that this does not seem to work together with neighbor route-map-out. As a work around, we are using set match-interface on redistribute connected and redistribute static and setting tags to later filter on the neighbor route-map-out. The question is how does "set match interface" actually work on a route-map-out. Documentation seemed very scarce on this topic. I am guessing it is matching the interface the neighbor is on, and not actually the source of the route? Any ideas?  Thanks in advance,RK