Solved

HiI need to migrate all IPSec Tunnel to one zone to create a single policy.Now i can't migrate tunnel because "Integrate Interface" is gray and it can't select it. 

Here is a cleaner and more professional version for your post:Hello everyone,I’m currently working with a FortiExtender (FEX) using LTE connectivity, and I’m facing an issue related to public IP changes.Every time the LTE provider assigns a new IP address, the connection drops completely. The only way to restore connectivity is by rebooting the FortiExtender.Has anyone experienced a similar behavior?I would like to understand:Is this expected behavior with LTE dynamic IP?Is there any configuration (keepalive, DPD, monitoring, etc.) that can prevent losing connectivity after an IP change?Would enabling specific SD-WAN or tunnel monitoring settings help in this case?Any recommendations or best practices would be greatly appreciated.Thanks in advance!

Hi,I tested a FortiExtender LAN Extension on an FGVM-02. After removing the Extender configuration, only the tunnel interface remains, which cannot be deleted. The error message is: (phase2-interface) # delete fext-ipsec-***Can not delete a static table entryCommand fail. Return code -61 Does anyone have an idea how I can remove it? Thanks. 

Hey guysI already know that we can update IPS Engine manually.https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-manually-upgrade-the-IPS-Engine/ta-p/194513https://community.fortinet.com/t5/FortiGate/Technical-Tip-Upgrading-IPS-Engine-on-the-primary-FortiGate-will/ta-p/202345But can we update IPS Engine automatically ? Are there any related document ?

Hi all. A dump question.Can we install the AD connector within the AD server?Cause in the article didn't mention about the connector is not allowed to install with the AD server.It only mention install in the host that can connect to both EMS and AD server but the host spec also not given.    

Hi to all,I would like to disable VPN on my Fortigate. It was configured by the company who installed the firewall but I will not use it. Which command do I have to run because I have asked to the Forticare and they told me to run the following which does not seem to correspond to unable the VPN but the opposite: config vpn ipsec phase1-interface    edit "VPN_Forticlient"        set type dynamic        set interface "wan"        set peertype any        set net-device disable        set mode-cfg enable        set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1        set comments "VPN: VPN_Forticlient (Created by VPN wizard)"        set wizard-type dialup-forticlient        set xauthtype auto        set authusrgrp "VPN_Group"        set i

We have several user groups mapped to separate, corresponding SSL-VPN Portals. Each of these portals has Split Tunnel Enabled Based on Policy Destination. Each of these portals also has Routing Address Override with network addresses that match the same "allowed destination" addresses in their corresponding policies. Is Routing Address Override even needed?According to Split Tunnel Enabled Based on Policy Destination, "Only client traffic in which the destination matches the destination of the configured firewall policies will be directed over the SSL-VPN tunnel."So in an example where the Accounting network is 192.168.0.0/24 and a user is in the Accounting Group, which is assigned to the Accounting Policy (that allows access to the 192.168.0.0/24 network); Would I even need any address in the Routing Address Override for the Accounting SSL-VPN Portal?From what I understand, any traffic to 192.168.0.0/24 would go over the SSL-VPN with Split Tunnel Enabled Based on Policy Destinati

Good day,      I'm trying to install a Fortigate 7.6.6 VM for a lab and have this issue      After that I only get a white screen, and enter the trial license window or the device or anything. This is my configuration FortiGate-VM64-KVM (port1) # showconfig system interfaceedit "port1"set vdom "root"set mode dhcpset distance 1set allowaccess ping https ssh httpset type physicalset snmp-index 1nextend FortiGate-VM64-KVM (dns) # showconfig system dnsset primary 8.8.8.8set secondary 8.8.4.4end FortiGate-VM64-KVM (1) # getseq-num : 1status : enabledst : 0.0.0.0 0.0.0.0gateway : 10.16.13.20preferred-source : 0.0.0.0distance : 1weight : 0priority : 1device : port1 This is what I get when I do the  diagnose debug enable diagnose debug application update -1 execute update-now FortiGate-VM64-KVM # execute update-nowupd_daemon[1981]-Received update request from pid=2518FortiGate-VM64-KVM # do_setup[349]-Starting SETUPupd_

Our district has started an esports program and we're having difficulties with Nintendo Switches on our network. NAT Type is B. UDP ports are not blocked. When hosting a game on a switch on our network, those outside the network cannot connect. They get a NAT Transversal error. What settings do I need to have on the FortiGate to allow esports traffic for the Nintendo Switches?

When we use IPSec for remote access with Split tunnel enabled, can we make the fortiget to not set dns in the client?Now when the forticlient connected to the VPN then the client can't access the local domain.

Hi all, We are building an automated pipeline to continuously collect SSL-VPN and IPSec debug logs from our FortiGate 90G devices, using:diagnose debug application sslvpn -1diagnose debug application fnbamd 8diagnose debug enable We specifically need the raw debug output (e.g. "SSL established: TLSv1.3 TLS_AES_256_GCM_SHA384") which is not present in structured logs and therefore not available via FortiAnalyzer or syslog. We have already gone through the following KB articles:• Continuous debug monitoring with Bash and Crontab:https://community.fortinet.com/t5/FortiAnalyzer/Technical-Tip-Continuous-debug-monitoring-with-Bash-and-Crontab/ta-p/305973 • FortiGate remote monitoring and logging CLI command output into a file:https://community.fortinet.com/t5/FortiGate/Configuration-Example-FortiGate-remote-monitoring-and-logging/ta-p/189892 Based on our research, it appears that the debug subsystem and the structured logging pipeline are architecturally separate, th

Can two FortiGate clusters (each configured in Active-Passive HA with 2 units) be interconnected through a Core switch?

FortiGate - 7.6.3FortiClient - 7.2.9 (Windows and Mac) I have been working with Support for weeks now with no success so hoping I can get help here.Fortigate config:config vpn ipsec phase1-interfaceedit "OpsIPSecVPN"set type dynamicset interface "port1"set ike-version 2set peertype anyset net-device disableset mode-cfg enableset proposal des-sha512 aes256-sha512set comments "VPN: OpsIPSecVPN -- Created by VPN wizard"set dhgrp 14set wizard-type dialup-forticlientset nattraversal disableset network-overlay enableset network-id 0set transport tcpset fortinet-esp enableset assign-ip-from nameset dns-mode autoset ipv4-split-include "OpsIPSecVPN_split"set ipv4-name "VPN_PCI_Operations_us2"set save-password enableset client-auto-negotiate enableset client-keep-alive enableset psksecret ENC *** FortiClient config:<connection><name>us2-LOACAL2</name><type>manual</type><ike_settings><keep_fqdn_resolution_consistency>0</keep_fqdn_resolution_c

Je viens de créer un tunnel VPN IPsec grâce à l'option VPN Wizard qui a automatiquement créé les politiques et les objets. Quand je lance mon FortiClient, je n'arrive pas à me connecter : un message d'erreur apparaît. J'ai récupéré les logs mais je ne trouve toujours pas ce qui bloque. C'est un Fortinet 101F avec la version v7.6.6 build3652voici quelque partie des logs ike 0:VPN:64: out B264FC333EFD2592341205A9F51C32110110020000000000000000C80D00003C000000010000000100000030010100010000002801010000800B0001000C00040001518080010007800E008080030001800200048004000E0D0000144A131C8107035845 5C5728F20E95452F0D000014AFCAD71368A1F1C96B8696FC775701000D00000C09002689DFD6B7120D00001412F5F28C457168A9702D9FE274CC02040D0000144C53427B6D465D1B337BB755A37A7FEF000000148299031757A36082C6A621DE00000000 ike V=root:0:VPN:64 : envoi d'un message IKE (ident_r1send) : , longueur=200, vrf=0, id=b264fc333efd2592/341205a9f51c3211 ike : réduction de la mémoire de 159 744 octets ike V=root:0 : réception de, ifin

Hello everyone, In a Fortinet FortiAnalyzer VM environment, we are frequently seeing the alert:[Your daily logs GB/day limit is exceeded within the last 7 days]I would like to hear from the community about real-world impacts when the daily log ingestion limit is exceeded.Have you experienced log loss, delayed indexing, or incomplete reports?Any noticeable performance impact or issues with analytics and event correlation?  Note: I am fully aware that the daily gigabyte allowance is quite low and I am willing to upgrade the license, I just wanted to know what I might be compromising on my analyzer. 

I'm spinning up a new pair of FortiGate 901G's to replace some Cisco FTD's (yuck!). I'm very used to and appreciative of Palo's way of doing security policy, centralized NAT, and a separate decryption policy. I like being able to make security policy directly based on app or URL category, rather than making profiles for everything. I don't see how profile mode is as flexible as policy mode. If I want to make a policy for a single app to be let through, I can't do that with profile mode, as an app control profile allows and denies all apps. For example, say I want to allow the "Quickbooks" app. I can't make a policy that has an app control profile of just allowing Quickbooks.. The app control policy would either end up blocking or allowing all apps. This is where i see the biggest downside to profile mode.I've spoken to a few people I respect in the Fortinet world, and they recommended staying with Profile mode for varying reasons...- I heard there is less support for Policy-based mode-

Hello,I have two FortiGates (Site 1 & Site 3) connected via two GRE overlays:GRE_DC1_S3_AS20 – latency: 0.39ms, packet loss: 0%, jitter: 0.05msGRE_DC1_S3_SP5 – latency: 35.15ms, packet loss: 0%, jitter: 2.79msI configured SD-WAN between the two sites.Test scenario:Site 1: 172.16.213.2Site 3: 172.16.233.31. Best-effort / untagged trafficSD-WAN rule: Best Quality, latency criterionTraffic correctly uses AS20When AS20 degrades, traffic fails over to SP5 → works as expectedAfter this test, I modified the SD-WAN rule for untagged traffic:Strategy: ManualPreferred interface: SP5Observed behavior:Untagged traffic correctly goes via SP5 (as intended)2. Classified traffic (CS6) SD-WAN ruleNetwork Control for CS6 class trafficStrategy: Best QualityCriteria: LatencyProtocol specification:Protocol number: 0Type of Service (TOS): 0xc0Bit mask: 0xffTest ping from 172.16.233.2 :ping -s 600 -c 100 -D -Q 0xc0 172.16.213.2Expected behavior:Traffic should use AS20 because latency (0.39ms) is well bel

My security team has this compliance requirement."Attempts to access websites through their IP addresses instead of their domain names are blocked by web content filters." How would this be configured in FortiGate? 

what can I do? I'm just on the LAN that is connected to the Fortigate 40F. 

In a custom dial-up VPN configurationWith ike v2 and mschap2 enabledI need to match users who connect to the VPN with their respective groups via radius attributes passed by Forti Authenticator.Currently, if I configure the IPSec tunnel with ike v1Xauth within the policies, it works.However, if I enable IKE v2, I connect to the VPN, and authentication works even with 2FA.Nevertheless, the user is not matched on Fortigate because I do not see them in the list:diagnose firewall auth listTherefore, the user is not associated with the remote radius group membership in Forti Authenticator.Is it possible to emulate the behavior of xauth while maintaining the relevant remote groups of Forti Authenticator within the policies, even with IKE v2?I would like to avoid creating x pahse1 interfaces for x groups on my Fauth that belong to two different LDAP servers.

HelloIs it normal that FAC 6.6.9 has more known issues that 6.6.8, which in turn has more known issues thank 6.6.7, which in turn has more known issues than 6.6.6?From what I understand, normally each new patch should fix known issued from the previous version, right?

Hello. I am trying to figure out how fortinet stuff works, and it seems like it's tied up to the cloud. It looks like I have to get my fortigate unclaimed before I can use it. Is that correct? I haven't found anywhere to put the serial number into, to check warranty status and if it's claimed. When I enter the SN into the forticloud I get this:Invalid input data:Please double-check the Fortinet appliance registration number you typed in. If your input is correct and the problem persists, please submit a customer service ticket. It is the 100% correct SN I am using. Could this mean my 101F has been claimed and is unusable? Thanks!

Hi Community, I would clearify, when enable "UEBA" feature, does it require install other FortiSIEM agent? as we already installed "FortiSIEM Log Agent" on servers (Window), our current version 7.4.x.x.Thanks for your respoonds. 

Admin I need help to generate report on the demo link, I've been searching for some time now on how to generate report in FortiMail, but none of the documentation helps. I haven't configured any single thing, because I saw there's already a data on the demo, please guide me on how to generate a report in this FortiMail Demo, thanks.

SSL VPN was replaced to IPSEC on FGT version 7.6. I already configure IPSEC IKEv2 with EAP enabled.But why in forticlient android when select IKEv2 there is no field to enter the credentials?