VPN

Hi @Rakeshi_ ,

If you want to access another vpn client from a vpn client, you need to define a rule from ssl.vpn interface to ssl.vpn interface.

Also, you can review this article for your request.

https://community.fortinet.com/t5/FortiGate/Technical-Tip-Communication-between-two-or-more-SSL-clients/ta-p/189810

@Rakeshi_ 

If you are looking to allow traffic between remote users (connected via FortiClient) and another site connected via IPSec tunnel, then here is an article to give you an idea on how the traffic flows:
https://docs.fortinet.com/document/fortigate/7.4.4/administration-guide/45836/ssl-vpn-to-ipsec-vpn

Additionally, you can try changing the configuration using the above article if there is a slight difference in the topology between the connected resources.

If you have found a solution, please like and accept it to make it easily accessible to others.

NSE 4-6-7

Hi @Rakeshi_,

Which IP are you trying to ping? Are you pinging from VPN client to an IP address behind the FortiGate? You can run debug flow to see if it is being dropped. Please refer to this article: https://community.fortinet.com/t5/Support-Forum/quot-Failed-create-SSL-quot-using-7-2-5-0847-Interim-version-on/td-p/332359

Regards, 

Hello @Rakeshi_ 

Can you please provide more information about IPs, and how they are connected, you can send us screenshot.

So we can understand which IP is not pinging 

You can run this command on FortiGate:

get router info routing-table details x.x.x.x---destination IP which you are trying to ping 

Make sure you have tunnel interface to that destination interface policy configured.