Your feedback drives change, make your voice count
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
I setup 1VM (FMG V8.0.0) and FW(V8.0.0) and trying to onboard fortigate firewall to manager but getting below error , is there any bug or do i need to make further changes in the configuration considering both VM Mgt subnet are in same subnet. Error
This article describes how to configure a Windows endpoint to generate and collect a memory dump file for troubleshooting Blue Screen of Death (BSOD) issues related to FortiClient (including version 7.4.7 and later versions).The generated dump file c
Hi, how do you set up a VXLAN when you have two locations? We're using FortiSwitches at both locations, and VLANs are also in use there.But we now have another location, and I'd like to know if it's possible to set up a VXLAN using the FortiLink VLAN
Why link status for each port is different between the device and fortinac? On the device port g1/0/27 - 31 is up but in the NAC is different
I try to send CoA to the endpoint but we can see from below picture the CoA is failed, and from tcpdump there is no traffic to port 1700. Also in the cisco switch i already enable CoA debug but not receive any message. This mean the fortinac not send
Hi everyone,I have the topology below using Fortigate HA Active -Active Cluster  Everything works normally until SW1 (the current STP root) is rebooted or powered off.After SW1 comes back (or after the topology reconverges), the topology does not rec
Hello everyone.I want to move old online data before I enabled Archiving to Archive storage. Since Clickhouse Archive only moves incoming logs as it comes, I swear I saw some commands to move old data to Archive but cannot find it now. Does any of yo
Running FortiWeb KVM_PAYG on Proxmox (standalone, not a cloud marketplace deployment). Reproduced this identically on two separate fresh installs — 8.0.6 build0116 and 7.6.9 build1133. Running FortiWeb KVM_PAYG on Proxmox (standalone, not a cloud mar
We have 2 internet connections terminated to our firewall with spare IPs, and SD-WAN is already configured outbound for load-balance/failover.We have a specific outbound service (SMTP) that we want to attach to a dedicated outbound IP address.Setting
Hi everyone,I'm looking for the FortiAnalyzer 7.2.11 JSON-RPC API documentation. Does anyone have a copy or know where I can find the complete documentation?I'm currently integrating FortiAnalyzer with an external system and need information on the a
Already have an account? Login
No account yet? Create an account
Enter your E-mail address. We'll send you an e-mail with instructions to reset your password.
