Traffic shaping

Forum|Forum|5 years ago
June 12, 2021
3 replies
3388 views

Hi,

I have the attached topology. Traffic shaping is enabled on FG.

from two isp I have 300 Mbps traffic, ISP A( 200) and B (100 )

Let's say I want to assign 200 Mbps for 10.0.0.0/8 through ISP-A and 192.168.2.0/24 to ISP B.

How can I do this?

I created two traffic shapers, ISP-A -200Mbps, and ISP-B 100Mbps.

Created two policies as below

policy (1)for 10.0.0.0/8

policy (2) for 192.168.2.0/24.

Does it work as expected?

Thanks

fg3.png

lobstercreed

New Member

From what you're describing, I see no actual traffic shaping intended. Instead, you want to use SD-WAN to do policy routing via ISP A or ISP B.

The only reason you'd need shaping is if you wanted to allow 192.168.2.0/24 to go out via ISP A (for example if B was down) but be limited to 100Mbps, leaving 100Mbps for 10.0.0.0/8 on ISP A.

simsAuthor

Explorer II

Hi ,

Thank you for your reply . I have the load balancer ( sw in the diagram, Actually I forgot to mark it in the diagram .sorry for that ) after fortigate firewall

Thanks

simsAuthor

Explorer II

Hi,

And also I want do traffic shaping like 10.0.1.0 /24 20 Mbps and 10.0.2.0/24 like this

Thanks

Sign up

Login with SSO

Login to the community

Login with SSO