SSL-VPN Dual Stack Failure

I cannot seem to get SSL-VPN working in a dual stack configuration.  The clients get an IPV4 address from the pool but they do not get one from the IPV6 pool.

 

IPsec VPN works fine in a dual stack configuration once an appropriate configuration for IPV6 was added under

 

config vpn ipsec phase2-interface edit "IPsec IPV6" set phase1name "IPsec VPN"

set src-addr-type subnet6 set dst-addr-type subnet6 end end When connecting the client to IPsec it receives both a IPv4 and IPV6 address from the pool and is able to browse resources on local lan using both IPV4 and IPV6.

 

Is SSL-VPN dual stack capable and if so what is missing?

 

Sincerely,

Bryan Z