SDWAN IPsec Priority

Hi @Reinaldo1_ADD,

You can set priority value for each SDWAN members. Please refer to https://community.fortinet.com/t5/FortiGate/Technical-Tip-Assigning-Priority-to-SD-WAN-Members-for-Default/ta-p/230911

Regards, 

config system sdwan

config health-check

edit "Name of SLA"

set source "IP Interface LAN"

end

end

I did the configuration, but it didn't work, it continues as down.

The settings are like this:

config health-check
edit "SLA SDWan VPN Azure"
set server "192.168.250.4"
set source 192.168.1.1
set members 7 6 5
next
end

Members:

edit 5
set interface "VPN_AZURE_T2"
set zone "SDWAN-IPSec"
set source 192.168.1.1
set cost 5
set priority 2
next

edit 6
set interface "VPN_AZURE_T1"
set zone "SDWAN-IPSec"
set source 192.168.1.1
set cost 10
set priority 3
next

edit 7
set interface "VPN_AZURE_T3"
set zone "SDWAN-IPSec"
set source 192.168.1.1
next
end