Skip to main content
GPC1
GPC1
New Member
February 6, 2024
Question

Origin IP Changed

  • February 6, 2024
  • 4 replies
  • 1622 views

I have upgraded the firmware from 7.4.1 to 7.4.2, after the upgrade I noticed that some of the addresses have been changed to ( 0.0.0.0/0 ) the address name remains but the IP has changed! does anyone face this issue? 

4 replies

ssteo
Staff
ssteo
Staff
February 6, 2024

Hello GPC1,

 

You can run command below and see what are the configuration change from 7.4.1 to 7.4.2.

diagnose debug config-error-log read

    GPC1
    GPC1Author
    New Member
    February 6, 2024

    I found the same issue in other firewalls, I ran the command but had no results

    Hong_FTNT
    Staff & Editor
    Hong_FTNT
    Staff & Editor
    February 6, 2024

    Hi @GPC1,

     

    Can you check in the CLI by running this command "show firewall address"? Do you see 0.0.0.0/0 in the CLI as well? 

     

    Regards, 

      GPC1
      GPC1Author
      New Member
      February 13, 2024

      Dear hbac,

       

      we changed the affected IPs to the origin 

      Terms & ConditionsAccessibility statement