Skip to main content
ivan5264
ivan5264
New Member
June 23, 2017
Question

Virtual IPs

  • June 23, 2017
  • 1 reply
  • 3921 views

I got a question about the Virtual IPs. When are we using the interface setting as "Any" ? 

Some i used the interface as any. Sometime are not working when I change the static route for the WAN Port. 

 

Thanks,

Ivan

    1 reply

    EMES
    EMES
    New Member
    June 23, 2017

    Are you changing the static route to use a different interface or a different gateway IP?

    ivan5264
    ivan5264Author
    New Member
    June 27, 2017

    It is use a difference interface and difference gateway IP. It mapped to 2 WAN interface. How can I apply a Static NAT for both traffic either the user access from A Subnet or B subnet.   

     

    For example,

     

    Interfaces

    A subnet (/28)--> port 1

    B subnet (/30) --> port 2 

     

    Virtual IPs

    1.1.1.1 /28 --> 192.168.1.x  interface : [ port 1 | Any]  <--- The interface setting will configure as port 1 or Any ?

     

    Thanks

    Ivan

    Terms & ConditionsAccessibility statement