Virtual IP not working

Which is virtualized server' s default gateway? 192.168.1.250 or another thing? If it' s 192.168.1.250, try sniffing one session to see what' s happening: If you still do not use those tools, use these articles as guidelines: http://kc.forticare.com/default.asp?id=1655 http://kc.forticare.com/default.asp?id=1186

Hi abel, Virtualized server' s default gateway is 192.168.1.250. Next monday I' ll post results of one session sniffed. Thanks, Jaime D

Hi, I' m in touch with the technical support. Apparently they haven' t changed anything but now it can be reached both servers from internet. But I had to bring the cherckpoint router back because my windows server 2003 cannot connect to the domain (several netlogon errors) 5719, 5783... It seems that when fortigate is connected, the Virtual IP configuration acts isolating the server from the LAN. Even when I' ve configured a internal to internal policy from all to all computers, any port, any time... Too strange, Jaime D

Hi Jaime, is the domain controller on the same subnet as the Windows server? If so the traffic would never get to the firewall, i.e. the firewall would not be blocking it. This seems to be a little more complex than it appeared initially. Can you post the output of " ipconfig /all" from your servers and a " show system interface" from the Fortinet command line. -S

Here you have: config system interface edit " wan1" set vdom " root" set ip 82.144.15.181 255.255.255.248 set allowaccess ping https ssh http set type physical next edit " modem" next edit " ssl.root" set vdom " root" set type tunnel next edit " wan2" set vdom " root" set ip 10.115.12.4 255.255.255.0 set allowaccess ping https set status down set type physical next edit " dmz" set vdom " root" set ip 172.24.1.5 255.255.255.0 set status down set status down set type physical next edit " internal" set vdom " root" set ip 192.168.1.250 255.255.255.0 set allowaccess ping https http set netbios-forward enable set type physical next end And ipconfig /all for my WS2003 C:\Documents and Settings\Administrador.RETANET.000>ipc Configuración IP de Windows Nombre del host . . . . . . . : retamar0 Sufijo DNS principal . . . . : RETANET.RETANET Tipo de nodo. . . . . . . . . : híbrido Enrutamiento habilitado . . . : No Proxy WINS habilitado . . . . : No Lista de búsqueda sufijo DNS : RETANET.RETANET Adaptador Ethernet VMware Network Adapter VMnet8: Sufijo conexión específica DNS: Descripción . . . . . . . . . : VMware Virtual Ether Dirección física. . . . . . . : 00-50-56-C0-00-08 DHCP habilitado . . . . . . . : No Dirección IP. . . . . . . . . : 192.168.112.1 Máscara de subred . . . . . . : 255.255.255.0 Puerta de enlace predet.. . . : Adaptador Ethernet VMware Network Adapter VMnet1: Sufijo conexión específica DNS: Descripción . . . . . . . . . : VMware Virtual Ether Dirección física. . . . . . . : 00-50-56-C0-00-01 DHCP habilitado . . . . . . . : No Dirección IP. . . . . . . . . : 192.168.183.1 Máscara de subred . . . . . . : 255.255.255.0 Puerta de enlace predet.. . . : Adaptador Ethernet Conexión de área local 2: Sufijo conexión específica DNS: Descripción . . . . . . . . . : Broadcom NetXtreme G Dirección física. . . . . . . : 00-18-8B-E6-DB-6A DHCP habilitado . . . . . . . : No Dirección IP. . . . . . . . . : 192.168.1.248 Máscara de subred . . . . . . : 255.255.255.0 Puerta de enlace predet.. . . : 192.168.1.250 Servidores DNS. . . . . . . . : 192.168.1.2 Servidor WINS principal . . . : 192.168.1.2 The fact is that when I connect the F60B I can reach from internet the two virtual IP I' ve defined above. But the WS2003 that has a mail server running inside is not able to send mail, to browse any web page, etc. this could explain that " also" is not able to connect to the PDC (that is in the same subnet). From internet I can reach these server with POP and SMTP. But the server can not initialize any SMTP session to the internet, so it can not send any mail. Any suggestion? Thanks Jaime D

Hi Jayme, as rw mentions, please check to make sure you have a policy which states: internal -> wan1 -> service: any -> action: permit -> NAT: enabled Also, what you are saying is that your PDC and your Win2k3 server are both on the 192.168.1.x subnet and both have a netmask of 255.255.255.0. If that is the case then there is no way that the firewall would be blocking traffic between the two since they would not be communicating with each other through the firewall. Just to be clear, can you also attach an ipconfig from the server that is trying to communicate with retamar0? When you install the Fortigate, can you still ping between your PDC and your Win2k3 server?

Hi all, Thank you for your help. News from today: I' ve reset to factory default my f60. Starting again! I followed these steps: - Internal interface/ WAN1 interface / Gateway -Policy: all (internal) to (WAN1) all ports any time without protection profile (NAT checked) And now, with only one policy we could figure that we would reach internet from my WS2003... not at all. All the LAN could but this server... ???? imposible. I turn off VMWARE server but... nothing: no browsing, ping, etc. Then I reviewed network configuration and I saw that a program called " Intel Pro Network utility or similar" was running but my network card is Broadcom NetXtreme... This intel software is part of the " old" server (it was migrated with Acronis true image server with universal restore from one machine to a new one). Uninstall " intrel Pro Network" , reboot.... and.... here you have!!! the server can now reach internet. Strange thing: the malfunction only happened with the Fortigate F60; when replaced with the safe@office it worked fine. Now I have to configure Virtual IP, but it seems to work. The only thing that still not working is smtp mail delivering to the internet. I create a policy from internal to WAN1; source address: My server; destination port SMTP; NAT (IP POOL: external IP)... but from now i get this error on the mail server: Mon 2008-05-12 17:15:27: Session 114; child 1 Mon 2008-05-12 17:14:45: Parsing message <c:\mdaemon\remoteq\pd35000187571.msg> Mon 2008-05-12 17:14:45: * From: jdominguez@retamail.com Mon 2008-05-12 17:14:45: * To: jaime.dominguez.barbero@gmail.com Mon 2008-05-12 17:14:45: * Subject: pepe Mon 2008-05-12 17:14:45: * Message-ID: <000d01c8b442$a31ff180$0101a8c0@web> Mon 2008-05-12 17:14:45: Intentando SMTP conexión con [gmail.com] Mon 2008-05-12 17:14:45: Resolviendo registros MX para [gmail.com] (Servidor DNS: 192.168.1.2)... Mon 2008-05-12 17:14:45: * P=005 S=002 D=gmail.com TTL=(10) MX=[gmail-smtp-in.l.google.com] {209.85.135.27} Mon 2008-05-12 17:14:45: * P=005 S=005 D=gmail.com TTL=(10) MX=[gmail-smtp-in.l.google.com] {209.85.135.114} multi-homed Mon 2008-05-12 17:14:45: * P=010 S=003 D=gmail.com TTL=(10) MX=[alt1.gmail-smtp-in.l.google.com] {74.125.47.114} Mon 2008-05-12 17:14:45: * P=010 S=004 D=gmail.com TTL=(10) MX=[alt2.gmail-smtp-in.l.google.com] {64.233.171.27} Mon 2008-05-12 17:14:45: * P=010 S=006 D=gmail.com TTL=(10) MX=[alt1.gmail-smtp-in.l.google.com] {74.125.47.27} multi-homed Mon 2008-05-12 17:14:45: * P=050 S=000 D=gmail.com TTL=(10) MX=[gsmtp147.google.com] {209.185.147.27} Mon 2008-05-12 17:14:45: * P=050 S=001 D=gmail.com TTL=(10) MX=[gsmtp183.google.com] {64.233.183.27} Mon 2008-05-12 17:14:45: Intentando SMTP conexión con [209.85.135.27:25] Mon 2008-05-12 17:14:45: * 209.85.135.27 in connection failure cache for up to 5 minutes due to previous connection failure(s) Mon 2008-05-12 17:14:45: Intentando SMTP conexión con [209.85.135.114:25] Mon 2008-05-12 17:14:45: Esperando la conexión del socket... Mon 2008-05-12 17:15:06: * Winsock Error 10060 Se ha agotado el tiempo de espera de la conexión. Mon 2008-05-12 17:15:06: * 209.85.135.114 added to connection failure cache for 5 minutes Mon 2008-05-12 17:15:06: Intentando SMTP conexión con [74.125.47.114:25] Mon 2008-05-12 17:15:06: * 74.125.47.114 in connection failure cache for up to 5 minutes due to previous connection failure(s) Mon 2008-05-12 17:15:06: Intentando SMTP conexión con [64.233.171.27:25] Mon 2008-05-12 17:15:06: * 64.233.171.27 in connection failure cache for up to 5 minutes due to previous connection failure(s) Mon 2008-05-12 17:15:06: Intentando SMTP conexión con [74.125.47.27:25] Mon 2008-05-12 17:15:06: Esperando la conexión del socket... Mon 2008-05-12 17:15:27: * Winsock Error 10060 Se ha agotado el tiempo de espera de la conexión. Mon 2008-05-12 17:15:27: * 74.125.47.27 added to connection failure cache for 5 minutes Mon 2008-05-12 17:15:27: Intentando SMTP conexión con [209.185.147.27:25] Mon 2008-05-12 17:15:27: * 209.185.147.27 in connection failure cache for up to 5 minutes due to previous connection failure(s) Mon 2008-05-12 17:15:27: Intentando SMTP conexión con [64.233.183.27:25] Mon 2008-05-12 17:15:27: * 64.233.183.27 in connection failure cache for up to 5 minutes due to previous connection failure(s) Mon 2008-05-12 17:15:27: Este mensaje tiene 2 minutos de antigüedad; faltan 58 minutos en esta cola Mon 2008-05-12 17:15:27: La sesión de SMTP ha finalizado (Bytes entrados/salidos: 0/0) " Intentando conexión" >>> " trying connection to" Any suggestion? Thanks Jaime