Traffic Shaping with Errors

Hello,

I have configured a traffic shaping for browser traffic and I have observed that there are a lot of errors (RX, RX dropped, RX_FIFO and Rx_Missed) in the Wan ethernet interface. Anybody knows how clean the error interfaces? 

diagnose netlink interface clear command isn't useful.

I have bought 90Mbps with my ISP and the traffic shaping to 60Mbps configured is:

name Max-60Mbps

maximum-bandwidth 7680 KB/sec

guaranteed-bandwidth 0 KB/sec

current-bandwidth 40 B/sec

priority 2

packets dropped 257444

# diagnose hardware deviceinfo nic wan1

Link               up

Speed                  1000

Duplex                 full

State                  up(0x1103)

MTU_Size           1500

Rx_Packets             3168185934

Tx_Packets             3975941418

Rx_Bytes           2349384673

Tx_Bytes           1723871841

Rx_Errors          66377822

Tx_Errors          0

Rx_Dropped             66377822

Tx_Dropped             0

Multicast          -6361583

Collisions             0

Rx_Length_Errors       0

Rx_Over_Errors         0

Rx_CRC_Errors          0

Rx_Frame_Errors             0

Rx_FIFO_Errors              66377822

Rx_Missed_Errors       66377822

Tx_Aborted_Errors      0

Tx_Carrier_Errors      0

Tx_FIFO_Errors              0

Tx_Heartbeat_Errors              0

Tx_Window_Errors               0

Thanks in advance!