Skip to main content
TJay
TJay
New Member
June 22, 2015
Solved

Syslog to FSSO

  • June 22, 2015
  • 1 reply
  • 5438 views

I have issue with configuring Forti authenticator to get the authentication information from CISCO ACS which will authenticate wireless users . I Have configure the Authenticator and I can see the traffic going from ACS to Authenticator But I'm unable to see the information from Authenticator. I have refer to the Authenticator admin guide to set this up but seems to be not working so far.

 

 

 

    Best answer by xsilver_FTNT

    What is the role of FortiAuthenticator , what do you want to achieve by this ?

    Is it:

    - RADIUS server for the Cisco ?

    - gathering RADIUS Accounting from WiFi controller and does RSSO for FortiGate ?

    - doing something totally different ?

     

    More info needed, or maybe consider to either contact Fortinet SE or Partner for advise with config or open a ticket with Fortinet Support.

     

    regards, Tomas

    1 reply

    xsilver_FTNT
    Staff
    xsilver_FTNTAnswer
    Staff
    June 22, 2015

    What is the role of FortiAuthenticator , what do you want to achieve by this ?

    Is it:

    - RADIUS server for the Cisco ?

    - gathering RADIUS Accounting from WiFi controller and does RSSO for FortiGate ?

    - doing something totally different ?

     

    More info needed, or maybe consider to either contact Fortinet SE or Partner for advise with config or open a ticket with Fortinet Support.

     

    regards, Tomas

    TJay
    TJayAuthor
    New Member
    June 22, 2015

    forti authenticator works for SSO for LAN users Im using AD polling mode.

    But for Wireless users they are authenticated through Cisco ACS,Basically ACS  send authentication infor to  Controllers for BYOD staff users. What I need to work SSO for BYOD staff users 

    Carl_Windsor_FTNT
    Staff
    Carl_Windsor_FTNT
    Staff
    June 22, 2015

    TJay wrote:

    Basically ACS  send authentication infor to  Controllers for BYOD staff users. What I need to work SSO for BYOD staff users 

    You don't explain how you have configured ACS to send the authentication info to FAC.  RADIUS Accounting, SYSLOG?  Whichever it is, you have to configure the relevant collector to parse the information and inject into FSSO.  Provide some more detail and perhaps screenshots of your config and we can endeavor to help.

     

    Terms & ConditionsAccessibility statement