Skip to main content
VoPPit
VoPPit
New Member
July 6, 2016
Solved

src-vis application crashed

  • July 6, 2016
  • 2 replies
  • 11680 views

My 500D has crashed twice within the past 2 weeks.

 

devname=RP-FortiGate-500D vd=root date=2016-07-06 time=13:34:20 logid=0100032546 type=event subtype=system level=warning vd=root logdesc="Application crashed" action=crash msg="Pid: 07553, application: src-vis, Firmware: FortiGate-500D v5.4.1,build1064b1064,160608 (GA) (Release), Signal 11 received, Backtrace: [0x01b07dca] [0x7f2182e87d00]"

 

Any ideas on where I should start looking for the root cause?  

 

Thank you

    Best answer by Toshi_Esumi

    According to this thread: https://forum.fortinet.com/tm.aspx?m=131286 it's used in FDS update process. I would open a TT right away since it's very likely a bug in 5.4.1.

    2 replies

    Toshi_Esumi
    SuperUser
    Toshi_EsumiAnswer
    SuperUser
    July 6, 2016

    According to this thread: https://forum.fortinet.com/tm.aspx?m=131286 it's used in FDS update process. I would open a TT right away since it's very likely a bug in 5.4.1.

    pcraponi
    pcraponi
    New Member
    July 6, 2016

    The root cause are 5.4.1 :)

     

    A very new branch (5.4) release. If you need more stability, downgrade to 5.2.8

     

     

    regards

    Toshi_Esumi
    SuperUser
    Toshi_Esumi
    SuperUser
    July 6, 2016

    By the way, when you open a TT with TAC, they would ask you to get some info out of your box with like "diag sys top", "get sys performance status", "diag debug crashlog read", "execute tac report", etc. I've learned only a part of them how to read the output. Not much documentation for those.

    VoPPit
    VoPPitAuthor
    New Member
    July 7, 2016

    Thank you Toshi, I am very new to the FortiNet community but I have submitted a few tickets and have gotten familiar with the CLI and logs they ask for.  I just wish there was a way to automate the process of gathering it all together.

    Toshi_Esumi
    SuperUser
    Toshi_Esumi
    SuperUser
    July 7, 2016

    "execute tac report" is for that and it includes most of info they need. But dynamic info like the one you can get a snapshot with "diag sys top" needs to be captured multiple times or at exact timing when something is happening. Welcome to our community, by the way.

    Terms & ConditionsAccessibility statement