Skip to main content
AskingForHelp
AskingForHelp
New Member
January 25, 2024
Solved

SD-WAN Rules API connection

  • January 25, 2024
  • 2 replies
  • 1821 views

Hello Community,

The setup is a FortiWiFi 80F running v7.2.6 firmware. My goal is to know which port the SD-WAN has chosen and get that data from the API.

From the GUI, I access Network > SD-WAN > SD-WAN Rules

In the 'IPv4' Column and 'Members' Row this cell shows two ports along with a check mark. The check mark tells which adapter the SD-WAN rule is using.

 

How can I know what the SD-WAN has chosen from the API?

 

I have tried health check but have not seen what I am looking for

 

 

 

 

https://192.168.50.1:443/api/v2/monitor/virtual-wan/health-check?access_token=nwm3N6Nfsjp5szxtdG64hqn8g9s8sx

 

 

 

 

 

 

Appreciate it

Best answer by Raghu_Kumar

Dear Customer,


In the SD-WAN rules list, the interface that is currently selected by the rule has a checkmark next to its name in the Members column. However the cursor over the checkmark to open a tooltip that gives the reason why that member is selected, such as has best measured performance.

Does it show both the member as check marked ?

You can use session list or debug flow to see what port is being used for the outgoing traffic.

 

KB article for your reference:


https://community.fortinet.com/t5/FortiGate/Technical-Tip-Check-the-session-list-and-filter-by-IP-address-or/ta-p/242090
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-First-steps-to-troubleshoot-connectivity/ta-p/192560


2 replies

Raghu_Kumar
Staff
Raghu_KumarAnswer
Staff
January 28, 2024

Dear Customer,


In the SD-WAN rules list, the interface that is currently selected by the rule has a checkmark next to its name in the Members column. However the cursor over the checkmark to open a tooltip that gives the reason why that member is selected, such as has best measured performance.

Does it show both the member as check marked ?

You can use session list or debug flow to see what port is being used for the outgoing traffic.

 

KB article for your reference:


https://community.fortinet.com/t5/FortiGate/Technical-Tip-Check-the-session-list-and-filter-by-IP-address-or/ta-p/242090
https://community.fortinet.com/t5/FortiGate/Troubleshooting-Tip-First-steps-to-troubleshoot-connectivity/ta-p/192560


    AskingForHelp
    AskingForHelpAuthor
    New Member
    February 9, 2024

    Thanks this helps

    Terms & ConditionsAccessibility statement