Skip to main content
danto
danto
New Member
October 11, 2012
Question

routing through ppp

  • October 11, 2012
  • 2 replies
  • 2518 views
Hi, I have an issue. I am trying to connect one FGT to a pptp server. The unit connects to the server, it adds a route ex. 10.0.0.60/32(the server address) and a route with 10.0.0.64/32(the FGT addess) connected via ppp1 How can I add a route for the 10.0.0.0/24 network? When I add a static route i have to specify the device for the route config router static edit 20 set dst 10.0.0.0/24 set gateway 10.0.0.60 set device ???? I do not have the ppp1 listed as an interface. Anyone have an ideea how can i do this?

    2 replies

    ede_pfau
    SuperUser
    ede_pfau
    SuperUser
    October 12, 2012
    As far as I know the FGT does not have PPTP client functionality. You might be out of luck if you need to stay with PPTP. Otherwise, switch to a real VPN (IPsec).
    danto
    dantoAuthor
    New Member
    October 12, 2012
    Hi, The FGT does have a pptp client capability. The configuration is done in the interface config. Take a look: config system interface edit " wan1" set pptp-client enable set pptp-user " *********" set pptp-password ********* set pptp-server-ip 86.x.x.x set pptp-auth-type mschapv2 set pptp-timeout 200 S* 0.0.0.0/0 [10/0] via 82.76.167.1, wan1 C 10.0.0.60/32 is directly connected, ppp1 C 10.0.0.63/32 is directly connected, ppp1 C 82.x.x.x/25 is directly connected, wan1 C 192.168.10.0/24 is directly connected, internal 10.0.0.63/32 is the Ip address assigned by the Server,and C 10.0.0.60/32 is the ip of the server. I do have conectivity with the server,but that is it. I want to add a route for the 10.0.0./24 network,But I cannot do that with ppp link Hostname (3) # show config router static edit 3 set dst 10.0.0.0 255.255.255.0 set gateway 10.0.0.60 next end Hostname (3) # set device ? <string> please input string value internal (192.168.10.10) interface ssl.root () interface wan1 (RDS) interface wan2 () interface Any ideea?
    Terms & ConditionsAccessibility statement