Remote gateway Firewall

Forum|Forum|8 years ago
February 28, 2018
5 replies
13159 views

I want to create a VPN ipsec with forticlient with the firewall "fortigate 90D" for my company.

My problem is that I don't know the remote gateway of my firewall. Where is it?

Thank's (Sorry for my english)

Best answer by rwpatterson

Go to http://whatismyip.com. The posted IP address more than likely will be your connection IP address. If this address is different than the address you are seeing, then you have an ISP gateway in front of your Fortigate. You will need to have that configured to pass the IPSec traffic through to your Fortigate. That is the only way this will work.

Markus

New Member

Hi, This is normaly the IP Adress of your WAN Interface. Good Luck

Fullmoon

New Member

if your 90D has Public address assigned on its WANx interface, then that is your remote gateway if you configure your forticlient connection.

EliBLAuthor

New Member

Thanks for your answer.

My WANx is assigned to a private address. I don't understand why. What I can do?

rwpattersonAnswer

New Member

Go to http://whatismyip.com. The posted IP address more than likely will be your connection IP address. If this address is different than the address you are seeing, then you have an ISP gateway in front of your Fortigate. You will need to have that configured to pass the IPSec traffic through to your Fortigate. That is the only way this will work.

Sign up

Login with SSO

Login to the community

Login with SSO