Skip to main content
joko
joko
New Member
August 3, 2018
Question

Problem with SD-WAN

  • August 3, 2018
  • 2 replies
  • 30848 views

need Help, 

 

 problem  SD-WAN connection on my firewall 60 D firmware v5.6.5 build1600 (GA),

 

I have 2 ISP connect to my Firewall, after i configure the SD-WAN, status on isp 2 Port WAN 2 Alwasy down, but when i check on interface WAN 2 status is up,

 

 

 

 

 

 

 

 

 

    2 replies

    Dave_Hall
    Dave_Hall
    New Member
    August 3, 2018

    Screenshot isn't that clear.  How are you doing the status checking or health checking on WAN2? - even with WAN2 connection up the fgt may be thinking the connection is down due to the settings for the status/health check.   If you are using ping to google's DNS 8.8.8.8, make sure this IP is pingable on the WAN2 connection.

    joko
    jokoAuthor
    New Member
    August 3, 2018

    Hi dave, 

     

    sory for unclear pic, 

     

    How are you doing the status checking or health checking on WAN2?

    By Ping To 8.8.8.8 

     

    If you are using ping to google's DNS 8.8.8.8, make sure this IP is pingable on the WAN2 connection

    I test by Unplug ISP cable in Wan 1  reconfigure the config using 1 ISP on WAN 2  Ping to 8.8.8.8 Ok no problem

     

    but if I change the server address SD-WAN Status Check  to another address,   wan 2 interface will be up but only about 10 seconds later it will come back down

     

    and for your info, On Port WAN 1 i got dynamic ip address from isp, on wan 2 i have static ip from ISP

     

    Thanks,

     

    Hare the capture : 

     

    Dave_Hall
    Dave_Hall
    New Member
    August 3, 2018

    Are you able to create a WAN status check for WAN2 that is separate from the one used for WAN1?

     

    Someone correct me if this is incorrect, but I always assumed for proper load-balancing the WAN connections should have the same distance/metric - it's the Load Balancing Algorithm that determines how traffic is dispersed.

    WarClock
    WarClock
    New Member
    August 6, 2018

    Hola buenas tardes gente, quisiera saber como hago para poder ver el estado de mis dos ISP del Internet, en una interface SD-WAN cuando se me cae una yo necesito saber eso.. alguien me puede ayudar.... 

     

    Google translate: Hello good afternoon people, I would like to know how I can see the status of my two Internet ISP, in an SD-WAN interface when I drop an I need to know that .. someone can help me ....

    joko
    jokoAuthor
    New Member
    August 14, 2018

    go to network==> SD-wan Status Check 

     

    OR 

     

    Monitor ==> SD-WAN monitor

    Terms & ConditionsAccessibility statement