Problem in transparent Mode

Forum|Forum|9 years ago
April 19, 2017
3 replies
5552 views

I have 60E Fortigate Device i want to change it from NAT to transparent mode. but after that i can't access my device and when i contact with forigate wifi its also show me limited access . below is the code

-> config system settings

-> set opmode transparent

-> set manageip 192.168.10.20 255.255.255.0

-> set gateway 192.168.10.1

-> end

jnliu_FTNT

Staff

There are hardware switch and software switch in FSW60E, if you change the whole box into TP mode, L2 loop may occur and you can not access the gear then.