ospf filter

3 replies
3011 views

Hi,

How can I do ospf filter in fortigate

Thanks

hubertzw

New Member

It depends what you try to achieve:

https://forum.fortinet.com/tm.aspx?m=146241

https://kb.fortinet.com/kb/documentLink.do?externalID=FD36851

https://kb.fortinet.com/kb/documentLink.do?externalID=FD32884

simsAuthor

Explorer II

Here is my scenario I have three vdoms , vdom aVdom bVdom c Vdom has static routes and connected networks , it is redistributed in OSPF . I don’t want these redistributed routes from a and b in vdom c’s routing table Vdim a ,b and c are in same areas Thanks

hubertzw

New Member

Can you try something like this? I didn't have chance to test it

1) set tag for the redistributed connected on one device

config router ospf
config redistribute connected
set tag 12345

2) then configure a route-map to filter tagged prefixes from the above device


config router route-map
edit test-tag
config rule
edit 1
set action deny
set match-tag 12345
end

config router ospf
set distribute-route-map-in test-tag

Sign up

Login with SSO

Login to the community

Login with SSO