Skip to main content
A
Anonymous_User
Contributor
October 20, 2008
Question

Open boot device failed

  • October 20, 2008
  • 3 replies
  • 4588 views
Hello, I' m new to the forum and I have a problem with a FortiGate 50B. I connect the console and select " Format boot device" and then the option " Get firmware image from TFTP server" . I select the ip address, the name of the image and begins to load it but then the following message appears: Total 14780290 bytes data downloaded. Verifying the integrity of the firmware image. invalid compressed format (err=1) I have tested with several images and all gave the same error. What can be wrong? thanks in advance.

    3 replies

    rwpatterson
    rwpatterson
    New Member
    October 20, 2008
    Welcome to the forums People here have had various levels of success with different TFTP servers. Try a different one. Also try to eliminate any switches and/or routers in between if possible.
    A
    Anonymous_UserAuthor
    Contributor
    October 23, 2008
    Hi, I am having the same issue but with a 300A. Tried all available firmware versions with no success.
    red_adair
    red_adair
    New Member
    October 23, 2008
    as rwpatterson says - there can be a huge difference with different tftpservers. After all the years i' m very happy with: http://tftpd32.jounin.net/ (and had lots of issues, usually customers have) with the 3com tool. -R.
    Terms & ConditionsAccessibility statement