Skip to main content
Esteemed Contributor III
Jun 26, 2006 7:37 PM UTC
Question

open backup file

Does anyone know how to view a backup file without loading it on to a unit. I need to compare settings from a previous backup to the current config without loading it on to my working unit. I was thinking something like notepad, but that doesn' t work. Thanks!

    9 replies

    UkWizard
    New Member
    Jun 26, 2006 9:05 PM UTC
    If its a full system backup, then i dont think there is any way to read it. Only way is to load onto a system or get fortinet support to decypher it for you. if its the config backup, then its plain text, so any wrap-around text editor will read it, like wordpad.
    Translate
    Esteemed Contributor III
    Jun 27, 2006 4:41 PM UTC
    It is a full backup. I' ll make sure to do config backups as well in the future. Thanks to all
    Translate
    Esteemed Contributor III
    Jun 27, 2006 12:47 PM UTC
    Here' s what I do to acheive that. Not a simple process. But it' s fairly easy once you get used to it. Use either telnet or an SSH client that will log output. Then, telnet or SSH connect to the box and type out the config. You may need to do this sections at a time. For example, to get the firewall rules, type " sho firewall policy" save the oputput to a text file and move on to the next section for the system interface config type " sho sys int" save the oputput to a text file and move on to the next section Do this for each area that you need to compare on each box. NAme them accordingly (ex:box1policies.txt, box2policies.txt, etc...) I hope that helps.
    Translate
    RickP
    New Member
    Jun 27, 2006 1:01 PM UTC
    Does anyone know how to view a backup file without loading it on to a unit.
    Which version of the firmware are you running? If it' s v3, it should be plain text unless you choose to encrypt it when generating the backup file. Note that if you have any certificates, they will not be included in a non-encrypted backup...
    Translate
    Esteemed Contributor III
    Jun 27, 2006 1:13 PM UTC
    Wow. Apparently the same holds true with 2.8 depending on the backup. A " system configuration" backup is cleartext and work do just fine. The " All configuration files" option is, however, encrypted and wouldn' t work. Good call Rick!
    Translate
    UkWizard
    New Member
    Jun 27, 2006 1:17 PM UTC
    A " system configuration" backup is cleartext and work do just fine. The " All configuration files" option is, however, encrypted and wouldn' t work.
    as per my previous post...
    Translate
    Esteemed Contributor III
    Jun 27, 2006 4:56 PM UTC
    My backups were the " all config files" type - so they would be encrypted. Thanks for responding.
    Translate
    UkWizard
    New Member
    Jun 27, 2006 9:10 PM UTC
    I always do a backup using both methods, just out of habit.. That way i can refer back to the config and look at the ip details for various customers units quickly using wordpad. Would highly recommend this to anyone, useful to have both i feel. Has anyone tried the backup to usb yet ?
    Translate
    Risk and Resilience in the Age of AI. An OT Thought Leadership Summit for Houston's Critical Infrastructure Leaders. Date: Thursday, December 3, 2026. Time: 8:30 am - 1:30 pm (CT). Location: The Westin Houston, Memorial City | 945 Gessner Road, Houston, TX 77024