Skip to main content
Seshu
Seshu
New Member
August 8, 2018
Question

Multiple WAN Configuration:

  • August 8, 2018
  • 1 reply
  • 4029 views

Hi,

I have FG-200E with Two wan ports by default.

and i used those two ports for two isp's.

And i have made one LAN port function as WAN(configured as primary and main wan port as secondary ) and i'm using it with out any problem. 

Now i have got one more ISP line which needs to be sent out with one more WAN port. So is that possible to make one more LAN port as WAN and its a totally different Link and need divert that traffic from existing WAN's.

    1 reply

    crispy
    crispy
    New Member
    August 8, 2018

    All ports on the firewall can be configured individually from one another depending on how you have configured your system. If you have a software or hardware switch, you may need to remove one of the ports from the switch and then set it up as your extra wan port as required.

    kd007
    kd007
    New Member
    September 7, 2018

    I would also suggest utilizing the SD-WAN features for this (after you configure the second port for the new ISP).

    Terms & ConditionsAccessibility statement