Skip to main content
Steve_Fuller
Steve_Fuller
Visitor III
June 7, 2018
Question

Multiple time server values possible?

  • June 7, 2018
  • 1 reply
  • 7059 views

Not finding any documentation for multiple hex values for times servers.

    1 reply

    Markus
    Markus
    New Member
    June 11, 2018

    Yes, you can have multiple time servers, but you have to use cli https://forum.fortinet.com/tm.aspx?m=103705

    Best

    Steve_Fuller
    Steve_FullerAuthor
    Visitor III
    June 11, 2018

    Let out the most important part, time servers within dhcp.

    Dave_Hall
    Dave_Hall
    New Member
    June 11, 2018

    NTP server addresses to be handed out to dhcp clients are configured/setup under config system server entries.  You can define up to 3 NTP servers by setting ntp-service specify then set values for ntp-server1, set ntp-server2, set ntp-server3, etc.

     

    See https://docs.fortinet.com/uploaded/files/3950/fortigate-cli-ref-56.pdf#%5B%7B%22num%22%3A3446%2C%22gen%22%3A0%7D%2C%7B%22name%22%3A%22XYZ%22%7D%2C49.5%2C544.5%2C0%5D

     

    Steve Fuller wrote:

    Let out the most important part, time servers within dhcp.

    Terms & ConditionsAccessibility statement