Skip to main content
SCSIraidGURU
SCSIraidGURU
New Member
February 20, 2018
Question

IPv6 configuration

  • February 20, 2018
  • 0 replies
  • 2305 views

I am working on my Cisco CCNP.  I am still learning IPv6.   I setup a Cisco Virtual Lab.

 

My IPv4 setup  Internal2 : 172.16.1.1 /24    vmnic1: FLAT : Internal2 : 172.16.1.1 /24  I have these static routes point back to 172.16.1.203 for use in Cisco VIRL labs on 60E  10.0.0.0 /8 192.168.32.0 / 255.255.224.0 192.168.64.0 / 255.255.224.0 172.16.16.0 / 255.255.240.0  172.16.32.0 / 255.255.240.0 

iosv-x interface uses 172.16.1.203 all the time.  It is static.   172.16.1.1 is static.   I can ping out of Cisco VIRL to my TFTP server to redirect SH Run other commands to text files.  Now, I am at the point of doing more IPv6 simulations.   I need a static IPv6 address for both 172.16.1.1 and 172.16.1.203 along with equivalent ranges for the 5 blocks above.  I was using 2001:DB8:32::1/64 for 192.168.32.0.   I need a way to get static routes to reflect back into VIRL on IPv6 in 60E. 

    Terms & ConditionsAccessibility statement