IPSec + software switch issue
Hi Folks,
I'm looking for any help from the community. I've connected my 2 private homes with 2 old (support expired) fortigate/fortiwifi and I'm facing a very strange behavior...
Situation Site A : FortiGate 60D (6.0.12) - Freebox Revolution (FTTH), mode bridge on "wan1" - Mode NAT (Flow-based) - uplink to core switch on LAN1 "internal"
- wifi provided by UniFi APs Site B : FortiWifi 60D (6.0.12) - Freebox Crystal (xDSL), mode bridge on "wan1" - Mode NAT (Flow-based) - uplink to core switch on LAN1 "internal" - Software Switch "lan" including "internal" and "wifi" - 3 FAP221C managed by this FortiWifi - 1 SSID published on "wifi" IPSec Tunnel LAN-to-LAN between Site A and Site B What's working
Everything from site B to any on wan1 ping from site A IP to site B ping from site B IP to site A SSH connexion from site B to a server on site A SSH connexion from site A to a server on site B snmpwalk from site A to site B snmpwalk from site B to site A HTTP/HTTPS session from site B to site A, but only if computer on site B is connected by wire to the LAN SMB session from site B to site A, but only if computer on site B is connected by wire to the LAN What's NOT working HTTP/HTTPS session from site B to site A, but only if computer on site B is connected by wifi to the LAN SMB session from site B to site A, but only if computer on site B is connected by wifi to the LAN
I'm stuck here... I would highly appreciate community help. Feel free to ask more details/logs/paket capture, etc.
Thanks in advance.
Regards,
Bruno
