Ipsec IKEV2 remote access vpn error
Hello,
I have created a ipsec ikev2 remote access vpn but when i trying to connect to it from forticlient in android or pc it shows an error stating: "protocol timeout reached" . Here is the fortigate (V 7.6.3) vpn config:
config vpn ipsec phase1-interface
edit "ITC VPN"
set type dynamic
set interface "port2"
set ike-version 2
set local-gw wan ip
set peertype one
set net-device disable
set mode-cfg enable
set ipv4-dns-server1 192.168.0.46
set proposal aes256-sha256
set comments "VPN: ITC VPN -- Created by VPN wizard"
set dhgrp 14
set eap enable
set eap-identity send-request
set wizard-type dialup-forticlient
set authusrgrp "IT_Users"
set transport udp
set peerid "reza"
set ipv4-start-ip 10.60.70.1
set ipv4-end-ip 10.60.70.3
set save-password enable cA2TeDH7DfQItGyaCzAdm+nyAodhdjOn3pkCw8DFQLoaMjfSMf1u69g/r/ivZ5K1Q82sP8X6ZvKzUf2ZhFxxACq3Xu8
next
end
In vpn Logs i can see that ipsec phase 1 failes with error : gateway validation failed
