Question
interface-stat-change
All, I just upgraded the firmware on our FGT-300A to mr6-b0673 from 405 and have noticed a very annoying thing with the above subject. I get interface-stat-change almost every hour and it knocks out internet access for almost 20 seconds which causes no end of trouble. I have a music stream running that I use to background listen that internet access is OK. Plus we have users who work on websites that require input and that input has to be submitted but when this interface change happens 
the info is lost and they have to input it again which usually means that they have to restart the session all over again. I have looked in the admin manual and checked the knowledge base but see nothing about this. Any ideas how to stop this or what might be causing this problem. This interface is the link to the Comcast cable modem that was just recently replaced by an SMC08014 unit from a older Cisco unit and at first it looked like it was happening when the av updates came in but I changed that from every hour to every three hours but the interface-stat-change keeps happening.
the info is lost and they have to input it again which usually means that they have to restart the session all over again. I have looked in the admin manual and checked the knowledge base but see nothing about this. Any ideas how to stop this or what might be causing this problem. This interface is the link to the Comcast cable modem that was just recently replaced by an SMC08014 unit from a older Cisco unit and at first it looked like it was happening when the av updates came in but I changed that from every hour to every three hours but the interface-stat-change keeps happening.