Skip to main content
davidlavender
davidlavender
New Member
August 3, 2021
Question

Intercom with X80s

  • August 3, 2021
  • 1 reply
  • 1639 views

Hello, I have not found a way yet to set up intercom an extension using a prefix button. We are coming from an ESI PBX where a simple press of the extension on an interoffice call could be set to auto answer. Anyone have any luck with this? As it is, I have to program an intercom button for every extension using *92XXX where the X is the extension. This takes up a lot of real estate.

    1 reply

    sjoshi
    Staff
    sjoshi
    Staff
    December 1, 2024

    Hi,

     

    To set up intercom for an extension using a prefix button on FortiFone desk phones, you can program a key with the intercom feature code (*92) followed by the extension number. Unfortunately, there isn't a direct way to set up auto-answer for intercom calls with a single button press. Each extension would need a programmed intercom button using *92 followed by the extension number, which may take up more space on the phone.

     

    Thanks, Salon
      Terms & ConditionsAccessibility statement