Skip to main content
mauro
mauro
New Member
January 27, 2016
Solved

Help understanding what is wrong

  • January 27, 2016
  • 2 replies
  • 13240 views

Hi all,

I've got a strange behaviour but I cannot figure out why.

I have a couple of ADSL modems (in bridge mode) connected to wan1 and wan2 of my fortigate 60D.

I created a load-balanced wan on the firewall which.

The modems have an IP on 192.168.200.0/29 where the management GUI responds.

To be able to reach these addresses  I created a policy which NAT the packet directed to this address behind an address belonging to the same network.

Then I created a static route to direct the packet to the right interface, wan1 or wan2, depending on the destination target.

Despite this I can reach one modem GUI only while the other is not responding.

Of course If I directli connect the modem to my PC I am able to browse its GUI.

Do you have any idea about what I am missing?

 

Here you are the flow trace of the packet directed to the modems:

 

 

MODEM1 (working)

 

id=20085 trace_id=7 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=1, 10.9.10.100:21859->192.168.200.1:8) from internal. code=8, type=0, id=21859, seq=0." id=20085 trace_id=7 func=init_ip_session_common line=4620 msg="allocate a new session-000781c6" id=20085 trace_id=7 func=vf_ip4_route_input line=1596 msg="find a route: flags=00000000 gw-192.168.200.1 via wan1" id=20085 trace_id=7 func=fw_forward_handler line=675 msg="Allowed by Policy-9: SNAT" id=20085 trace_id=7 func=__ip_session_run_tuple line=2596 msg="SNAT 10.9.10.100->192.168.200.3:62464" id=20085 trace_id=8 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=1, 192.168.200.1:62464->192.168.200.3:0) from wan1. code=0, type=0, id=62464, seq=0." id=20085 trace_id=8 func=resolve_ip_tuple_fast line=4530 msg="Find an existing session, id-000781c6, reply direction" id=20085 trace_id=8 func=__ip_session_run_tuple line=2610 msg="DNAT 192.168.200.3:0->10.9.10.100:21859" id=20085 trace_id=8 func=vf_ip4_route_input line=1596 msg="find a route: flags=00000000 gw-10.9.10.100 via internal" id=20085 trace_id=9 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=1, 10.9.10.100:21859->192.168.200.1:8) from internal. code=8, type=0, id=21859, seq=1." id=20085 trace_id=9 func=resolve_ip_tuple_fast line=4530 msg="Find an existing session, id-000781c6, original direction" id=20085 trace_id=9 func=__ip_session_run_tuple line=2596 msg="SNAT 10.9.10.100->192.168.200.3:62464" id=20085 trace_id=10 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=1, 192.168.200.1:62464->192.168.200.3:0) from wan1. code=0, type=0, id=62464, seq=1." id=20085 trace_id=10 func=resolve_ip_tuple_fast line=4530 msg="Find an existing session, id-000781c6, reply direction" id=20085 trace_id=10 func=__ip_session_run_tuple line=2610 msg="DNAT 192.168.200.3:0->10.9.10.100:21859"

 

 

MODEM2 (NOT working)

 

id=20085 trace_id=11 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=2, 192.168.200.2:0->224.0.0.1:0) from wan2. " id=20085 trace_id=11 func=resolve_ip_tuple_fast line=4530 msg="Find an existing session, id-0005ef78, original direction" id=20085 trace_id=12 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=2, 192.168.200.2:0->224.0.0.1:0) from wan2. " id=20085 trace_id=12 func=resolve_ip_tuple_fast line=4530 msg="Find an existing session, id-0005ef78, original direction" id=20085 trace_id=13 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=1, 10.9.10.100:33379->192.168.200.2:8) from internal. code=8, type=0, id=33379, seq=0." id=20085 trace_id=13 func=init_ip_session_common line=4620 msg="allocate a new session-00078386" id=20085 trace_id=13 func=vf_ip4_route_input line=1596 msg="find a route: flags=00000000 gw-192.168.200.2 via wan2" id=20085 trace_id=13 func=fw_forward_handler line=675 msg="Allowed by Policy-9: SNAT" id=20085 trace_id=13 func=__ip_session_run_tuple line=2596 msg="SNAT 10.9.10.100->192.168.200.3:62464" id=20085 trace_id=14 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=1, 10.9.10.100:33379->192.168.200.2:8) from internal. code=8, type=0, id=33379, seq=1." id=20085 trace_id=14 func=resolve_ip_tuple_fast line=4530 msg="Find an existing session, id-00078386, original direction" id=20085 trace_id=14 func=__ip_session_run_tuple line=2596 msg="SNAT 10.9.10.100->192.168.200.3:62464" id=20085 trace_id=15 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=1, 10.9.10.100:33379->192.168.200.2:8) from internal. code=8, type=0, id=33379, seq=2." id=20085 trace_id=15 func=resolve_ip_tuple_fast line=4530 msg="Find an existing session, id-00078386, original direction" id=20085 trace_id=15 func=__ip_session_run_tuple line=2596 msg="SNAT 10.9.10.100->192.168.200.3:62464" id=20085 trace_id=16 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=1, 10.9.10.100:33379->192.168.200.2:8) from internal. code=8, type=0, id=33379, seq=3." id=20085 trace_id=16 func=resolve_ip_tuple_fast line=4530 msg="Find an existing session, id-00078386, original direction" id=20085 trace_id=16 func=__ip_session_run_tuple line=2596 msg="SNAT 10.9.10.100->192.168.200.3:62464" id=20085 trace_id=17 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=2, 192.168.200.2:0->224.0.0.1:0) from wan2. " id=20085 trace_id=17 func=resolve_ip_tuple_fast line=4530 msg="Find an existing session, id-0005ef78, original direction"

 

Thank You

 

Regards

Best answer by rwpatterson

These devices are on two different interfaces. Make 2 unique transfer subnets and try again. (192.168.200.0/30 and 192.168.200.4/30 for example)

2 replies

rwpatterson
rwpattersonAnswer
New Member
January 27, 2016

These devices are on two different interfaces. Make 2 unique transfer subnets and try again. (192.168.200.0/30 and 192.168.200.4/30 for example)

mauro
mauroAuthor
New Member
January 28, 2016

I separated the two subnet:

modem1: 192.168.200.1/30 NAT:192.168.200.2

modem: 192.168.200.5/30 NAT:192.168.200.6

but it looks there is the same behaviour. I cannot see the packets replied by the modem2:

 

MODEM1

2016-01-28 08:09:40 id=20085 trace_id=1222 func=init_ip_session_common line=4620 msg="allocate a new session-00097fc1" 2016-01-28 08:09:40 id=20085 trace_id=1222 func=vf_ip4_route_input line=1596 msg="find a route: flags=00000000 gw-192.168.200.1 via wan1" 2016-01-28 08:09:40 id=20085 trace_id=1222 func=fw_forward_handler line=675 msg="Allowed by Policy-9: SNAT" 2016-01-28 08:09:40 id=20085 trace_id=1222 func=__ip_session_run_tuple line=2596 msg="SNAT 10.9.10.100->192.168.200.2:65198" 2016-01-28 08:09:40 id=20085 trace_id=1223 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=6, 192.168.200.1:80->192.168.200.2:65198) from wan1. flag [S.], seq 4225730003, ack 2280903650, win 2100" 2016-01-28 08:09:40 id=20085 trace_id=1223 func=resolve_ip_tuple_fast line=4530 msg="Find an existing session, id-00097fc1, reply direction" 2016-01-28 08:09:40 id=20085 trace_id=1223 func=__ip_session_run_tuple line=2610 msg="DNAT 192.168.200.2:65198->10.9.10.100:65198" 2016-01-28 08:09:40 id=20085 trace_id=1223 func=vf_ip4_route_input line=1596 msg="find a route: flags=00000000 gw-10.9.10.100 via internal" 2016-01-28 08:09:40 id=20085 trace_id=1224 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=6, 10.9.10.100:65198->192.168.200.1:80) from internal. flag [.], seq 2280903650, ack 4225730004, win 65535"

 

MODEM2

2016-01-28 08:13:04 id=20085 trace_id=1322 func=init_ip_session_common line=4620 msg="allocate a new session-00098095" 2016-01-28 08:13:04 id=20085 trace_id=1322 func=vf_ip4_route_input line=1596 msg="find a route: flags=00000000 gw-192.168.200.5 via wan2" 2016-01-28 08:13:04 id=20085 trace_id=1322 func=fw_forward_handler line=675 msg="Allowed by Policy-10: SNAT" 2016-01-28 08:13:04 id=20085 trace_id=1322 func=__ip_session_run_tuple line=2596 msg="SNAT 10.9.10.100->192.168.200.6:65212" 2016-01-28 08:13:05 id=20085 trace_id=1323 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=6, 10.9.10.100:65211->192.168.200.5:80) from internal. flag , seq 585892197, ack 0, win 65535" 2016-01-28 08:13:05 id=20085 trace_id=1323 func=resolve_ip_tuple_fast line=4530 msg="Find an existing session, id-00098094, original direction" 2016-01-28 08:13:05 id=20085 trace_id=1323 func=__ip_session_run_tuple line=2596 msg="SNAT 10.9.10.100->192.168.200.6:65211" 2016-01-28 08:13:05 id=20085 trace_id=1324 func=print_pkt_detail line=4469 msg="vd-root received a packet(proto=6, 10.9.10.100:65212->192.168.200.5:80) from internal. flag , seq 3535325209, ack 0, win 65535"

Terms & ConditionsAccessibility statement
Thought Leadership. Security Summit. Thursday, November 12th, PGA National Resort, Palm Beach Gardens, FL.
Thought Leadership. Security Summit. Thursday, October 8th. Disney's Grand Californian Hotel & SPA, Anaheim, CA.
Security Operations Summit: Modernize SecOps. Operate AI-Native.AMER: November 4 | 9:00 AM PST. India and SAARC: November 5 | 10:00 AM IST. EMEA: November 5 | 10:30 AM CET. APAC: November 5 | 11:00 AM SGT