Skip to main content
imacosx
imacosx
New Member
March 31, 2015
Question

FSSO - polling mode limit

  • March 31, 2015
  • 3 replies
  • 16238 views

Hi,

 

I have a doubt about the limits of FSSO polling mode configuration. A provider set up that method in our LAN and works fine for a couple of users, but when they deployed the configuration for all the network, It didn't work. 

 

I was wondering if there is some kind of limits or restrictions to apply this method into a network. 

 

P.S. The network has 900 clients more or less.

    3 replies

    Carl_Wallmark
    Carl_Wallmark
    New Member
    March 31, 2015

    Hi,

     

    Polling mode is more suitable for smaller networks, with 900 user the polling will have issues with the rate of logon/logoff events.

     

    Use DC agents instead.

    xsilver_FTNT
    Staff
    xsilver_FTNT
    Staff
    March 31, 2015

    agree with "Selective", local polling directly from FGT is entry level of FSSO. Serves good for small environments like SoHo, single office few employees (<~100). All FSSO and the load also depends on environment type and usage and users behavior. It will be different load for company where everyone log in morning to workstation and leaves afternoon (9-to-5), and different for campus or library where there is student logging in and out every 90 minutes and to classes all of them within some 10 minutes.

     

    So all those aspects has to be taken in account in FSSO design.

     

    FGT basically poll Windows Security (WinSec) log every 10 seconds, not changeable, limited logging & debug.

    Standalone Collector Agent can accommodate DCAgents, TSAgents + poll WinSec / NetAPI / new WMI (best polling option with lowest traffic volume), log, debug log, event ID map so just selected IDs can be polled or so .. much better solution for Enterprise grade solutions.

    FortiAuthenticator as Collector, even bigger solution with possible integration of multiple authentication data sources turned into FSSO and then provided to multiple FGT units.

     

    Regarding FSSO limits on FGT check "FSSO Polling" group for your unit size on Max Values site for your FortiOS

    For FOS 5.2.2 it's here http://help.fortinet.com/.../5-2-2/max-values.html

    xsilver_FTNT
    Staff
    xsilver_FTNT
    Staff
    April 1, 2015

    as I tried to tell, there is not exact number like "it can hold max 42 users" .. NO!

    It depends on number and frequency of logon events and strength of your FGT unit as CPU will handle this via "authd" daemon, basically.

    RTT (round trip time) below some 100ms to polled DC is another limit, shorter RTT the better. Once it climbs over some 100ms it start to be a bit unpredictable in higher load (logon events to process increased). It also bring additional load to network for DNS resolutions (FSSO highly depend on DNS) and LDAP resolves. So local network is recommended.

    If you have high load, spread network like on DC in New York and another in Sydney, or non native clients like MacOS then I'd suggest to use Collector Agent on DC or even separate server. It's always better option and it makes almost no additional load to CPU of DC, it's pretty light weight solution.

    imacosx
    imacosxAuthor
    New Member
    March 31, 2015

    Hi,

     

    Thanks so much for the answer. Another question related to the subject.

     

    If polling mode is suitable for smaller networks, what it is the maximum number of clients that can hold this configuration.

     

    EDIT:

    ----------

    I did see xsilver answer when I wrote this post. 

     

    Terms & ConditionsAccessibility statement