Frequency Handoff settings

The default RSSI for the frequency hand-off is 25, with the range being 20-30. The default for the ap hand-off is 30, with the range being 5-35. I find the defaults work well and have never changed them. They can be changed from the CLI:

config wireless-controller wtp-profile  edit your-ap-profile  set handoff-rssi <20-30>  set handoff-sta-thresh <5-35>  end  

ONe thing i' ve not understood: There is a frequency hand off setting for both radios. If one is on 2.4 and the other on 5 do I want it enable don both? Given that we want to push people to 5 where possible, should it only be turn on on that radio? Or is it the other way around?

Freq HO is only trying to move a client from 2.4G radio to 5G radio using two steps:. 1. the controller needs to know if a client is capable of support 5G, which requires its radio to monitor clients on 5G band. 2. When a client tries to connect to a 2.4G radio, whether to reject this client if it is capable of 5G.

In most cases you' ll want to push 2.4 clients to 5GHz if capable, but as 5GHz clients become more common there may be times when you need to push some down to 2.4GHz.

OK so the checkbox for handoff needs to be set on both radios?