Fortigate80E 2 Wan Problem

3 replies
2004 views

Hi All,

I'm using Fortigate80E v6.0.9 build0335. We have two different internet connection. One is radiolink and second one is VDSL. I've already setup VDSL modem as bridge and on fortigate i choose pppoe and wrote down username and password. when i enable VDSL in interfaces; my connection is lost. i want to use both wan connection and i'll set policy like clients would use wan1 (radiolink) and servers use wan2(vdsl). I searched forum and couldn't find the answer. Can you help me?

Thanks

FortiGate

jintrah_FTNTAnswer

Staff

Hi,

Please check the admin distance of pppoe interface,it is by default set at 5, you may want to change it to 10 to match that of vdsl. or Alternately, use admin distance of 5 for the static/default routes across radiolink to match that with pppoe.

best regards,

Jin

jintrah_FTNTAnswer

Staff

Hi,

Please check the admin distance of pppoe interface,it is by default set at 5, you may want to change it to 10 to match that of vdsl. or Alternately, use admin distance of 5 for the static/default routes across radiolink to match that with pppoe.

best regards,

Jin

OzzonationAuthor

Visitor III

Hi,

When i changed distance to 10, vdsl worked. and i changed some clients to vdsl. some of them got connection problems. in the end i get implicit deny error. i'm trying to figure it out