FortiGate Telemetry on IPSEC Aggregate Interface

Dear All,

We have a branch office with a 60E and connected to the main office via a simple Site To Site VPN. Recently both offices have installed a new ISP connection for BackUp porpouses. Also, we are changing our 100D to two 100E in HA, and we are configuring the new ones from zero to improve configuration a little bit.

Following FortiOS Cookbook we managed to configure an IPSEC aggregate tunnel to use the main and backup ISP as one Aggregate VPN. The tests we have made seems to work fine, but the problem is that we can't select this Aggregate interface in the Fortigate Telemetry options in Security Fabric to continue receiving information from branch office Fortigate.

The question is. There is any method (CLI or GUI) to allow a IPSEC aggregate to send/receive Telemetry data?

Sorry about my english. Thank you very much for your help.

Best Regards,