Skip to main content
prosysmike
prosysmike
New Member
June 29, 2017
Solved

Fortigate Remote Power

  • June 29, 2017
  • 1 reply
  • 6802 views

Hi,

 

What solution do any of you use to remotely power down a Fortigate when it enters unrecoverable conserve mode?

 

I have a few devices in remote locations that I cannot get to in a timely manner, I need to be able to remotely connect to a PDU of some sort to power down a port and reboot the device. I have some across 8 way switching PDU's such as the one below from APC and Lindy but a single port device would be ideal. Any thoughts and what have you done to get over this problem?

 

https://www.lindy.co.uk/networking-c5/remote-access-c266/ip-power-switch-classic-8-power-management-over-ip-p4456

 

http://www.apc.com/shop/my/en/products/Rack-PDU-Switched-1U-16A-208-230V-8-C13/P-AP7921

 

    Best answer by ede_pfau

    Sorry to hear that. My advice: get a new FGT instead of putting so much energy into a cludgy workaround. Conserve mode is a sure sign that the device is undersized (or misconfigured).

     

    An IP-based PDU won't help you much if not directly connected to the WAN - which is a security nightmare in itself. So, separate 3G/4G router with second WAN address only for lights-out mgmt?

    1 reply

    ede_pfau
    SuperUser
    ede_pfauAnswer
    SuperUser
    July 2, 2017

    Sorry to hear that. My advice: get a new FGT instead of putting so much energy into a cludgy workaround. Conserve mode is a sure sign that the device is undersized (or misconfigured).

     

    An IP-based PDU won't help you much if not directly connected to the WAN - which is a security nightmare in itself. So, separate 3G/4G router with second WAN address only for lights-out mgmt?

    prosysmike
    prosysmikeAuthor
    New Member
    July 3, 2017

    Thanks, the unit has recently been through RMA process so I would imagine that the setup could be the source - although Fortinet have investigated and not found any problems....

     

    So, luckily I have multiple firewalls in this DC and will be using another WAN IP to connect to the PDU. We have the Lindy PDU arriving this week in order to solve this problem.

    Terms & ConditionsAccessibility statement