Fortigate 90D two network

3 replies
4836 views

i have the following situation

i have and adsl line connected to the external, i created a VPN network on it on other location, the vpn work great with no issues,

my router is 192.168.11.200 and my other network VPN tunnel is 192.168.20.1

but i have another network , MPLS network, with a bridge gateway 192.168.11.1 and connected to other subnets outside my offices , the problem as follow,

i want to configure -route or policy- between the VPN tunnel and the other MPLS network , HOW?

Pradhumna_FTNT

Staff

Hi,

If the phase2 is configured with Source and destination network as 0.0.0.0/0, great ,else first step would be to create phase2's for the MPLS networks.

Then create a firewall policy from VPN interface to MPLS interface (Where the MPLS router is conencted) and enable the NAT on the firewall policy.

Regards,

Pradhumna chnadra