Skip to main content
SpartaniusZG
New Member
Apr 4, 2020 1:56 PM UTC
Question

FortiGate 60E multiwan setup

85.85.85.85/29 with WAN 1 IP 85.85.85.82 with default gateway 85.85.85.81 VIP are 85.85.85.82 - 86 86.86.86.86/29 with WAN 2 ip 86.86.86.82 with default gateway 86.86.86.81 VIP are 86.86.86.82 - 86 I have 6 vlans(vlan 1-3), 3 are going on wan 1 Out other 3 on WAN 2 Out (vlan 4- 6) I have static routes 0.0.0.0/0 85.85.85.81 wan1 0.0.0.0/0 86.86.86.81 wan2 Policy route define belonging vlan with belonging wan address For example vlan 1 to wan 1-vlan 1 addresses-all All policy to wan are applied and working When i try traceroute for every vlan the defaul gateway is 85.85.85.81!! How to set policy that each vlan has belonging default route!??

    1 reply

    abelio
    SuperUser
    SuperUser
    Apr 4, 2020 5:18 PM UTC

    Hello

    you're posting in the wrong forum; this one is just for ADC stuff.

     

    Re-post this in the relevant FortiGate forum, surely you'll be luckier there

     

     

     

    Translate
    Risk and Resilience in the Age of AI. An OT Thought Leadership Summit for Houston's Critical Infrastructure Leaders. Date: Thursday, December 3, 2026. Time: 8:30 am - 1:30 pm (CT). Location: The Westin Houston, Memorial City | 945 Gessner Road, Houston, TX 77024