Skip to main content
Fullmoon
Fullmoon
New Member
December 9, 2020
Question

FML in TPMode

  • December 9, 2020
  • 1 reply
  • 2417 views

Hi, anyone successfully tested configuring FML in TP Mode using VMware workstation version 12.1 and Esxi version 6.7?

After I changed the operation mode to TP mode, neither ping and GUI are no longer accessible despite the ip address is present in port1 interface. Any settings I need to work with vmware side?

    1 reply

    Jjchen_FTNT
    Staff
    Jjchen_FTNT
    Staff
    December 10, 2020

    Probably you have two NIC in one virtual switch, causing broadcast storm. Please check this guide: https://docs.fortinet.com...rtual-network-settings

    Terms & ConditionsAccessibility statement