Skip to main content
yeowkm99
yeowkm99
New Member
August 23, 2022
Solved

Export Analyzer Reports

  • August 23, 2022
  • 1 reply
  • 2095 views

Can i export reports from old Analyzer 200D to my new Analyzer 300G so that i dont have to re-create all the reports 

Best answer by Debbie_FTNT

That is a good idea!

We have a KB on how to restore a FAZ config on a different model (like moving to a different hardware mode): https://community.fortinet.com/t5/FortiAnalyzer/Technical-Tip-Using-exec-migrate-to-migrate-to-a-new/ta-p/193414

1 reply

Debbie_FTNT
Staff & Editor
Debbie_FTNT
Staff & Editor
August 23, 2022

Hey yeowkm99,

in principle you can export reports and import into a different FortiAnalyzer, but you might run into issues if they are in different firmware versions. Some of the underlying syntax might have changed between different FortiAnalyzer firmware versions for example. I'm not sure if there is a common firmware version between a 200D and 300G; you might want to open a ticket with FortiAnalyzer support and verify with them, or ask them if they could import the reports on a lab FortiAnalyzer, run that through upgrade processes, export the reports again in a higher version and share with you so you can import on the 300G.

ede_pfau
SuperUser
ede_pfau
SuperUser
August 23, 2022

Another suggestion: get a FAZ trial VM, restore your FAZ config (with some minor adjustments maybe), upgrade to the firmware version of the new FAZ, and export the reports. Might be worth a try.

    Debbie_FTNT
    Staff & Editor
    Debbie_FTNTAnswer
    Staff & Editor
    August 23, 2022

    That is a good idea!

    We have a KB on how to restore a FAZ config on a different model (like moving to a different hardware mode): https://community.fortinet.com/t5/FortiAnalyzer/Technical-Tip-Using-exec-migrate-to-migrate-to-a-new/ta-p/193414

    Terms & ConditionsAccessibility statement