Skip to main content
Mustafa_Kamel
Mustafa_Kamel
New Member
December 29, 2017
Solved

Enable Application Control Profile

  • December 29, 2017
  • 1 reply
  • 6796 views

Hello everyone,

I need to enable application control profile on all my policies, how can i do this in one step?

 

    Best answer by neonbit

    There's no way to enable it in one step. To make it easy you can just drag/drop the application from one policy to all the others.

    1 reply

    neonbit
    neonbitAnswer
    New Member
    December 29, 2017

    There's no way to enable it in one step. To make it easy you can just drag/drop the application from one policy to all the others.

    Sidewaysguy
    Sidewaysguy
    New Member
    December 29, 2017

    Without touching all of the policies you want to affect individually, my only suggestion would be to back up the config, add the profile to the policies that need it and then restore the config.  The issue here is that you'd end up with down time. 

     

    How many policies are you wanting to edit?  And which firmware are you using? 

     

    I would have to have a massive amount of policies to warrant an outage for something like this that can be changed from the main policy GUI.  It may take a few minutes but better than an outage.

    Mustafa_Kamel
    Mustafa_KamelAuthor
    New Member
    December 30, 2017

    I have many policies, it may be up to 7500 policy

    Firmware : 5.2.

     

    but i will enable application control on all policies in my company on all fortigate firewalls, some of this firewalls include firmware version 5.4, others include 5.2  and number of policies on all firewalls may be up to 15000 policy

     

    so i need a fast action to do this without any down time and more fast

    Terms & ConditionsAccessibility statement