Skip to main content
ashok_kumar
ashok_kumar
New Member
March 18, 2015
Solved

Default ip

  • March 18, 2015
  • 5 replies
  • 11657 views

Dear Friends,

                    what is the default ip address of forti ap 221b?

    Best answer by emnoc

    Did you try 192.168.1.2 ?( mask /24  )

    5 replies

    emnoc
    emnocAnswer
    New Member
    March 18, 2015

    Did you try 192.168.1.2 ?( mask /24  )

    ashok_kumar
    ashok_kumarAuthor
    New Member
    March 19, 2015

    Yes and also 192.168.8.X tried but not getting

    bravishank_FTNT
    Staff
    bravishank_FTNT
    Staff
    March 19, 2015

    Ashok,

     

    I would suggest you to Factory Reset the Box, and try 192.168.1.2 IP address.

     

    Sometimes, if Static IP  address is configured on the FAP,  it needs a factory reset to clear them.

     

    To Factory Reset, Hold the Factory Reset Button in FAP for more than 10 seconds.

     

    Please refer to the enclosed image.

     

     

     

     

    ashok_kumar
    ashok_kumarAuthor
    New Member
    March 19, 2015

    Hi am tried the same but not getting..

    emnoc
    emnoc
    New Member
    March 19, 2015

    Suggestion

     

    If you  connect it to a firewall or computer with a dump program, maybe you can diag sniffer or wireshark and see what it sends out upon bootup. It most likely will send a ARP request if it has static address and if it's dhcp-enabled it will send 0.0.0.0 bootpc until as in a dhcp request until it get an offer.

     

     

    ashok_kumar
    ashok_kumarAuthor
    New Member
    March 19, 2015

    Thanks friends,now its working....i can access with 192.168.1.2

     

    Many thanks,

    Ashok

    Terms & ConditionsAccessibility statement