Commit failed: Minimum psksecret length is 6

Hi NOUFOU,

Can you please edit your template tunnel, re-enter the PSK manually in the field, save it.
Then try to install and let me know if this is successful or not.

Is it possible to check if when creating a new IPSEc Template ( save it only once ) and then try to install it, is this successfull or not? (You can just stop at Install Preview to check if the first Copy step is successful or not).

If still issue persists, then reproduce this issue while collecting the below diagnostic command output from both FortiManager and managed FortiGate.

- On the FortiManager:
diagnose debug application securityconsole 255
diag debug app depmanager 255
diagnose debug application fgfmsd 255 <fgt device name>
diagnose debug enable
diagnose debug time enable
! After the installation error, stop debugging with the commands below
diagnose debug disable
diagnose debug reset

- On the FortiGate:
exe tac report
diagnose debug application fgfmd 255
diagnose debug cli 255
diagnose debug console time enable
diagnose debug enable
! After the installation error, stop debugging with the commands below
diagnose debug disable
diagnose debug reset

Regards

Hi @NOUFOU ,

We do have an existing Mantis 1084696 for this issue.  However, the fix is already included in FMG 7.6.2 GA. 

It should not be related to the FGT versions.  But if your other FGTs are not 7.4.5, you may consider upgrading this FGT in issue for a try.

Otherwise, please open a TAC ticket for assistance.

For posterity/future Google search results:

Updating to 7.6.2 does NOT fix this bug, but upgrading to 7.6.3 does fix it. Additional bug/Mantis ID reported by TAC yesterday: 1115582

After updating our Fortimanager to 7.6.3 I confirmed I was able to make changes to a tunnel in one of our IPsec templates without the error being presented in the install wizard.