Skip to main content
Soy
Soy
New Member
October 4, 2013
Question

Code -61

  • October 4, 2013
  • 2 replies
  • 34698 views
Return code -61 what does it mean? I input the correct syntax command. Thanks and regards Soy

    2 replies

    ede_pfau
    SuperUser
    ede_pfau
    SuperUser
    October 4, 2013
    Please quote the command in the CLI, together with the error message (copy&paste the text).
    Soy
    SoyAuthor
    New Member
    October 5, 2013
    Hi Ede, NECFGT_SLAVE (sip) # set sip-udp-port 5080 command parse error before ' sip-udp-port' Command fail. Return code -61 Thanks and regards
    ede_pfau
    SuperUser
    ede_pfau
    SuperUser
    October 5, 2013
    This is set in " config system settings" . Options here are valid for a specific VDOM only not globally. That leads me to the suspicion that you might not have the permission to administer the current VDOM - ?
    Soy
    SoyAuthor
    New Member
    October 6, 2013
    Hi Ede, Yes my config was wrong. It should be enter under the config system settings.. Yes actually I don' t have access on the firewall but I' m helping the admin to configure a policy for SIP traffic because he doesn' t know. By the way are these commands are correct: 1. show system session-helper 2. show system sip-setting 3. show system settings Thanks and regards Soy
    Terms & ConditionsAccessibility statement